Fairybell Wall tree Assembly Instructions

Important information
After (seasonal) use, make sure the Fairybell
completed dry. Lay the Fairybell ® out on the ground
and tie the orange ribbons around various sections of
the Fairybell ® (straps with lights) so that next season
you start with an untangled Fairybell
When placing the Fairybell ® back into the box, hold the
top hook and lower the bottom part (plugs and elastics)
first into the box and finish on top with the hook.
Always store the Fairybell ® in a clean and dry place.
Lower the Fairybell ® at windforce 6 or higher.
Missing parts or defects
All spare parts can be ordered at our webshop.
See 'service request' at our website.
Need help?
Do you need help with placing the Fairybell
Scan the QR code below to watch the instruction video's
from our products.
Scan QR for our
instruction video's
www.fairybell.com
® is
® .
® ?
Fairybell
®
Hemsson Holding BV www.fairybell.com
This is a worldwide patented product | Certifications: CE and
is a registered trademark of
For more information:
www.fairybell.eu/service
www.fairybell.us/service
RoHS compliant | FSP0336
Fairybell Wall tree
®
Assembly instructions - Opbouw instructies
Aufbauanleitung - Instruction de construction
Istruzioni di assemblaggio - Monteringsanvisning