Sony TC-K333ESR Service Manual page 5

TC-K333ESR/K730ES
Head Height Adjustment . Back tension: 0
Insert a mirror cassette or adjustment cassette and Make sure that there is no tape twist at portions
adjust screws @ — ©@ so that the tape enters the 6 -®@.
tape guide
of the record/playback
head smoothly
1. When the tape twists upwards:
when pushing the head base out by hand.
Turn adjustment
screws @ , @ of the
1, Make an adjustment
cassette as shown below
record/playback head and recline the head
When the tape twists downwards:
Turn adjustment screws © ; @ and
recline the head as shown in Fig. d.
Measure the height of erase head.
follow the procedures below.
Insert the mirror cassette (or adjustment cas- Adjust the height by screws ®@, @, @
sette) into the set. In FWD mode, the tape of the erase head.
Adjustment locations:
adjustment screw of tape curl in Fig. b
(Be careful not to turn the screw more than 1/2
turn.)
REC/PB head erase head pinch roller guide
Note: The values shown are
for reference purposes.
supply side pinch roller
tape curl
adjustment screw
pinch roller guide
tape guide
REC/PB head REC/PB head erase head
The tape should be in the
center of the head.
E Te a