Top Cover Removal; Front Panel Assembly Removal - Toshiba PC-G33 Service Data

1.
| PC-G33
2. DISASSEMBLY INSTRUCTIONS
TOP COVER REMOVAL
Remove two screws (A) (3@ x 8mm) from each side of
top cover and three screws (3¢ x 8mm) from rear
side of unit, then the top cover can be removed from
the unit. (See Figure 3, 4 and 5)
Figure 3 (A) 36 x 8mm
(A) 3¢ x 8mm Figure 4
3¢ x 8mm
FRONT PANEL ASSEMBLY REMOVAL (with Mecha-
nism Assembly)
1.
2.
5:
Remove the top cover. (See Figure 3, 4 and 5)
Pull out the REC BALANCE knob from front panel.
Remove two screws (C) (3¢ x 8mm) and () (3¢ x
16mm). (See Figure 6)
Remove one screw (€) (3¢ x 8mm) then the front
panel assembly can be removed from the unit. (See
Figure 6)
MECHANISM ASSEMBLY REMOVAL
i
2.
Remove the front panel.
Remove four screws (©) (3¢ x 18mm) then the
mechanism assembly can be removed from the front
panel assembly. (See Figure 7)
Figure 5
©3¢ x 8mm ©)3¢x 16mm ©3¢x 8mm
Figure 6
) 3 x 18mm (Red)
Figure 7