Sony alpha 7 S III Operating Instructions Manual page 35

When focus is achieved automatically based on the whole range of the
monitor
• When you use a zoom function other than the optical zoom in the still
image shooting mode, the [
the focusing frame is shown by the dotted line. The AF operates with
priority on and around the center area.
To move the focus area
You can move the focus area by operating the multi-selector when
[ Focus Area] is set to the following parameters:
– [Zone]
– [Spot: L] / [Spot: M] / [Spot: S]
– [Expand Spot]
– [Tracking: Zone]
– [Tracking: Spot L] / [Tracking: Spot M] / [Tracking: Spot S]
– [Tracking: Expand Spot]
If you assign [Focus Standard] to the center of the multi-selector
beforehand, you can move the focusing frame back to the center of the
monitor by pressing the center of the multi-selector.
Hint
• When [ Focus Area] is set to [Spot] or [Expand Spot], you can move the
focusing frame over a greater distance at a time by setting
[ AF Frame Move Amt] to [Large].
• You can move the focusing frame quickly by touching and dragging it on
the monitor. Set [Touch Operation] to [On], and set [Touch Func. in Shooting]
under [Shooting Screen] in [Touch Panel Settings] to [Touch Focus]
beforehand.
Focus Area] setting is disabled and
EN
35