Table of Contents
Advertisement
Quick Links
Operation & Installation Instructions
GX4
Series
GX4-H
Series
GALAXY UV - Standard Systems
System
Rated Flow
System
GX4-8
GX4-H15
GX5-8
8 lpm
GX5-H15
GX6-8
GX6-H15
GX4-11
GX4-H38
GX5-11
12 lpm
GX5-H38
GX6-11
GX6-H38
GX4-23
GX4-H53
GX5-23
22 lpm
GX5-H53
GX6-23
GX6-H53
GX4-41
GX4-H95
GX5-41
GX5-H95
41 lpm
GX6-41
GX6-H95
GX4-57
GX4-H150
GX5-57
57 lpm
GX5-H150
GX6-57
GX6-H150
GX4-79
GX5-79
79 lpm
GX6-79
GX5 / 6
Series
Rated Flow
15 lpm
38 lpm
53 lpm
95 lpm
150
lpm
GX5-H / 6
Series
Advertisement
Table of Contents
Summary of Contents for GALAXY UV GX4 Series
- Page 1 Operation & Installation Instructions GX4-H GX5 / 6 GX5-H / 6 Series Series Series Series GALAXY UV - Standard Systems System Rated Flow System Rated Flow GX4-8 GX4-H15 GX5-8 8 lpm GX5-H15 15 lpm GX6-8 GX6-H15 GX4-11 GX4-H38 GX5-11 12 lpm...
- Page 2 This is chemical free process which is simple in its concept and effective in its abilities to inactivate microorganisms present in the water supply. Simple maintenance, continuous disinfection and ultimately safe water, GALAXY UV makes it that easy. P a g e...
-
Page 3: Table Of Contents
QR Codes ....................... 17 System Troubleshooting..................18 Temperature Management Devices ................. 20 Expansion Modules ......................20 GALAXY UV Standard Output System Specifications ............22 GALAXY UV High Output System Specifications ............... 23 Limited Warranty Statement: ................... 24 Warranty Registration ...................... 25... -
Page 4: Safety Considerations
Safety Considerations Although your UV system has been manufactured to the highest safety standards, care must be followed when operating and/or maintaining your system. 1. Before servicing this equipment, disconnect the power cord from the electrical outlet. 2. Energy given off by the UV lamp is harmful to your eyes and skin. NEVER look directly at an illuminated UV lamp without adequate eye protection and always protect your skin from direct exposure to the UV light. -
Page 5: Water Quality Parameters
80% for pre-treatment recommendations) You can have your water tested at a private analytical laboratory or by your local dealer. It is always recommended to install pre-filtration of at least 5 microns prior to a GALAXY UV disinfec- tion system. -
Page 6: Assembly
Assembly Unpack the system and ensure all the components are included with the system. Your system is shipped with the following components: GALAXY UV (Standard output lamp systems) LAMP KEY GLAND NUT CONTROLLER 320006 G4 SYSTEMS O-RING GX-C-4 G5/G6 SYSTEMS... - Page 7 GALAXY UV (High output lamp systems) LAMP KEY GLAND NUT CONTROLLER 320006 G4-H SYSTEMS O-RING GRC-4H 300038 (fits all units) G5-H/G6-H SYSTEMS UV LAMP GRC-56H GX-RL-H210 “-15” series (fits all units) GX-RL-H330 “-38” series GX-RL-H420 “-53” series GX-RL-H600 “-95” series GX-RL-H950 “-150”...
-
Page 8: System Sizing
System Sizing All GALAXY UV systems are rated for a specific flow rate in water that meets the quality param- eters on page 5. PLEASE NOTE that increasing the flow above this rating or disinfecting water that does not meet the quality parameters will decrease the dose and therefore compromise the microorganism inactivation. -
Page 9: Installation
UV lamp and/or quartz sleeve (See Figure 2). The controller will require a ground fault circuit interrupter (GFCI or GFI) outlet and should be mounted beside or above the reac- tor. PLEASE NOTE: All GALAXY UV disinfection systems are intended for indoor use only as they should not be exposed to the elements. - Page 10 Step 6: Once the system has been plumbed in, gently remove the quartz sleeve from its packaging being careful not to touch the length with your hands. The use of cotton gloves is recommended for this procedure as oils from the hands can leave residue on the sleeve and lamp which can ultimately block the UV light from getting to the wa- ter.
- Page 11 Step 11: Always hold UV lamps by their ceramic ends, not by the lamp quartz. Remove the lamp from its packaging. Again, the use of cotton gloves is recommended. Remove the lamp key from the lamp’s connector and set it aside for the next step. Be careful to not touch the key’s exposed contacts.
-
Page 12: System Disinfection
Reinstall the filter cartridge into the sump and flush the chlorine solution by open- ing all faucets until chlorine can no longer be detected. Your home has now been completely disinfected with your GALAXY UV system ready to inactivate any microorganisms that enter the home. -
Page 13: Cleaning The Uv Sensor
Replace sensor following step 9 from the installation section of the manual. Operation GALAXY UV systems come with a feature laden controller that incorporates both the lamp driver (ballast) and control features in one water-tight case. Four main controllers are available for the GALAXY UV systems (depending on your model). -
Page 14: Gx4/-H Controllers
When the UV lamp is not on or the lamp life has expired, the LED will be illuminated red and an audible buzzer will be sounding. To remedy this condition, the UV lamp must be replaced with a new genuine GALAXY UV lamp. GX4-H GX5/-H & GX6/-H Controllers A full colour LCD screen provides the user with a detailed description of the system’s performance in addition to pro-... -
Page 15: Gx5/-H Operational Screens
On systems without the UV monitor, the default screen shows the GALAXY UV Home Screen. At any point during operation the user is able to scroll through the GALAXY UV Home Screen, Lamp life remaining, QR Code, Contact Info and Maintenance Parts screens by pressing the button located on the front of the controller. -
Page 16: Gx6/-H Operational Screens
GX6/-H Operational Screens On systems with the UV monitor, the system will display the same screens as on the GX5/-H except the UV Intensity replaces the home screen. The UV Intensity screen displays the level of UV light detected by the sensor. UV intensity can be affected by poor water quality, scaling on the quartz sleeve and/or sensor, lamp failure or lamp expiring. -
Page 17: Lamp Replacement (Gx4/-H Systems)
A QR code (Quick Response code) is a matrix barcode first designed for the automotive industry. GALAXY UV uses the QR code to store a link to a specific page on our website. Users with a camera phone equipped with the correct reader application can scan the image of the QR code and over a wireless network connect to a GALAXY UV web page in the phone’s browser. -
Page 18: System Troubleshooting
System Troubleshooting Hard Alarms: The following give a constant audible alarm. If present, the solenoid valve is closed, and the 4-20, remote alarm and ethernet modules transmit the alarm. System Display Problem Resolution Reset lamp protection circuit -unplug unit for 10 seconds. The system has detected Replace the lamp with the a problem with the... - Page 19 Warning: After any hard alarm, the home or facility should be disinfected. Follow the steps un- der the “System Disinfection” heading. Boil Water Advisory: If any failure occurs on a GALAXY UV system, the water must not be used for human consumption until the system is returned to a safe operational mode.
-
Page 20: Temperature Management Devices
UV lamp. In these cases, or if the elevated water temperature is a nuisance, GALAXY UV recommends one of the following forms of temperature management devices. - Page 21 SOLENOID CONNECTION MODULE: Connects a NORMALLY CLOSED line voltage solenoid valve to the system. On a non-monitored system, the sole- noid will only close on a lamp failure error. On a monitored system, the solenoid is closed when the UV level drops below 50%. Also note that in cases where emergency use of untreated water is re- quired, the controller can be placed into a manual override mode allowing for the flow of water in an...
-
Page 22: Galaxy Uv Standard Output System Specifications
GALAXY UV Standard Output System Specifications GALAXY UV EQUIPMENT SPECIFICATIONS Residential systems (standard output lamps) Multi-Use / GX4-8 GX4-11 GX4-23 GX4-41 GX4-57 GX4-79 MODEL GX5-8 GX5-11 GX5-23 GX5-41 GX5-57 GX5-79 GX6-8 GX6-11 GX6-23 GX6-41 GX6-57 GX6-79 3.8 gpm 6.1 gpm... -
Page 23: Galaxy Uv High Output System Specifications
GALAXY UV High Output System Specifications GALAXY UV EQUIPMENT SPECIFICATIONS Residential Crossover systems (high output lamps) GX4-H15 GX4-H38 GX4-H53 GX4-H95 GX4-H150 MODEL GX5-H15 GX5-H38 GX5-H53 GX5-H95 GX5-H150 GX6-H15 GX6-H38 GX6-H53 GX6-H95 GX6-H150 4.0 gpm 10 gpm 14 gpm 25 gpm... -
Page 24: Limited Warranty Statement
Limited Warranty Statement: Products manufactured by Aquastream Water Solutions, (GALAXY) are warranted to the original user only to be free of defects in material and workmanship for a period as specified below. This warranty only applies to the original purchaser and is not transferable. UV SYSTEMS Ten (10) year Limited Warranty on the stainless steel reactors, from the date of original purchase, or installation (proper documentation required for verification). -
Page 25: Warranty Registration
TO GET WARRANTY SERVICE Please contact the Dealer or Distributor where the product was originally purchased to obtain service under this warranty. Your Dealer / Distributor will obtain a Warranty Return Authoriza- tion and will then need to return the product to GALAXY, together with proof of purchase and installation date, failure date, and supporting installation data. - Page 26 2 6 | P a g e...
- Page 27 2 7 | P a g e...
- Page 28 Aquastream Water Solutions 7 Croft Crescent, Toowoomba Queensland, 4350 Australia Phone: 07 4635 4612 Fax: 07 4635 4622 Freecall: 1800 446 500 www.aquastream.com.au PN#910227 Version Date: 07-2017...