Samsung HW-C500 User Manual page 35

SETTING THE SPEAKER SIZE
Signaloutputsand frequencyresponsefrom the speakerwill be adjustedaccordingto your speakerconfigurationandwhether
certainspeakersare usedor not.
1. Press the SETUP/MENU button.
,, Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the A T buttons to select SPK SIZE, and then press the ENTER
or _- button.
4. Press the A 'V' buttons to select the speaker you want, and then press
the ENTER or I_ button.
,, Each time you press the A T buttons, FRONT-->CENTER-->SURR -->
SUBW ---)CROVR will be selected in turn.
5. Press the A T buttons to set the mode (LARGE, SMALL etc.) for the
selected speaker.
[f'lu±lZU .C1_ _ Ul "_ J
S" Omi,_ 7 jiii ml i
I"l'[l_ll,i t _.'ltl l"'ll_l_ j
6. Repeat steps 3-5 to set the mode for each speaker.
- To exit setup mode -
• Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
Setting the Speaker
FRONT (Front) LARGE, SMALL SMALL
CENTER (Center) LARGE, SMALL, NONE SMALL
SURR (Surround) LARGE, SMALL, NONE SMALL
SUBW (Subwoofer) YES, NO YES
CROVR (Crossover Frequency) 60, 80, 100,120, 150, 180, 200(Hz) i 100Hz
,, LARGE : Select when using large speakers. You can listen to full range sound.
,, SMALL : Select this when using small speakers
,, NONE : Select when no speaker is used
,, YES (subwoofer) : Select when using the subwoofer speaker.
,, NO (subwoofer) : Select when not using the subwoofer speaker.
,, CROVR : Select the crossover frequency for the best bass response in your room.
(_ _ You can also use SETUP, ^,V, <, >, ENTER on the front of your AV Receiver.
_ When the Front speaker is only set to LARGE, you can select LARGE of other speakers.
35