TCP Smart SMAFLOODRGBCCTIP66UK Quick Start Manual

Specifications:
Dimensions: 146 x 35 x 170 mm
Brightness: 3000 lumen
Kelvins: Warm 2700K - Daylight 6500K
RGB 16 million colours
Power usage: 30w
Lifetime: 15,000 hours
Mercury (HG): 0 mg
Voltage: 100-240V
CRI: 80
IP Rating: IP66
Sensor range: 10m
Dimmable: Dimmable via app and remote
Includes: Smart Floodlight, Remote control
& Ground stake
WiFi: 2.4 GHz
Cautions & Warnings:
The manufacturer provides warranty in accordance with
the legislation of the customer's own country of
residence, with a minimum of 1 year, starting from the
date on which the appliance is sold to the end user.
The warranty only covers defects in material or
workmanship.
The repairs under warranty may only be carried out by
an authorized service centre. When making a claim
under the warranty, the original bill of purchase (with
purchase date) must be submitted. The warranty will not
apply in cases of:
Normal wear and tear. Use of force, damage caused by
external influences. Misuse e.g. connection to an
unsuitable mains supply. Partially or completely
dismantled appliances.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical &Electronic Equipment)This marking
shown on the product indicate that it should not be
disposed with other household wastes at the end of it is
working life.
Please separate from other types of waste and recycle
responsibly. If in doubt, please contact your local
recycling centre for details of where and how this item
can be safely recycled.
We are social, check us out!
.com/c/TCPSmart
@tcpsmart
TCP Smart Lighting Flood light UK -
SMAFLOODRGBCCTIP66UK
Functions:
RGB - Choose from 16 million colours
CCT - Relax with a warm 2700K light or concentrate with
a cooler 6500K light
Biorhythm
Music mode
Dimmable via App
Schedule your lighting to suit your lifestyle
TCP hereby declares that the device is in compliance with
the essential requirements and other relevant provisions
of directives 2014/53/EU and 2011/65/EU.
Full declaration can be viewed at tcpi.eu.
App Install Instructions:
01. Download the TCP Smart App from the App Store or
Google Play.
Log in or set up an account using the on screen prompts.
02. Use the add 03. Choose add
device button in
device from the
the top right menu.
corner.
If the Light is not
automatically
detected or if
the installation
fails the Light
can be put into
set-up mode by
turning the
power off for at
least 10 seconds
then turning the
Light On and Off
5 times.
06. Wait for the On / Off / On /
device to install.
Off / On / Off /
Finalise the
On / Off / On /
installation by Off / On.
clicking done.
The light should
flash quickly.
04. The Smart 05. Enter your
Bulb should network details.
automatically be
discovered. If not,
choose bulb from
the lighting tab.
Smart Home
Assistant
TCP Smart products work with
Amazon Alexa, Google Nest &
Siri Shortcuts.
For further information on
connecting to smart home
assistants visit
https://www.tcpsmart.eu/faq/