Table of Contents
Advertisement
X-45/85
CIRCUIT DESCRIPTION
Function name
Key symbol
Function
Rewind play
<4"
After the tape Is rewound up to the ae
sai the first tune is aarehion Nat and then is Biaved after its
|
or
: searching out.
ahi
b
7
7
_—
Dash and play
Pn
When the no-tune state continues i more ss 10 sucouds nade the play ices the tape is ne
(Fuil repeat)
When the head of the next tune is thus scanned out, the play mode is restored. A full repeat function is
also provided by means of the reverse mode switch
—_—
...One side full repeat, 8 times
Double-side full repeat, 8 times (16 sides of tape)
Cc
..Double-side relay repeat (29 to 31 sides A and B of tape}. When the other deck is not
loaded with a cassette half, the tape stops at the RVS end (1 to 2 sides of tape).
Zero stop
:
| After the tape is rewound or fast forwarded until the counter goes to "0000", the tape stops. However,
one deck is subject to the zero stop operaton, after which the use of counter is changed to the counter of
the other deck.
Then, when the associated keys of that deck are pressed, this latter deck can also be
subject to the zero stop operation parallelly.
Rerec standby
=
| Performed by pressing the rewind key while recording.
' The tape is rewound, the end of the previous track is detection, a two-second blank section is found, and
the deck stops.
KEY MATRIX
12
Advertisement
Table of Contents
