Summary of Contents for PUMATRONIX VTR 600
- Page 1 INSTALLATION GUIDE / REVISION 01.2023 VTR 600 HIGH PRECISION AND EFFECTIVENESS FOR POLICE OPERATIONS IN INSPECTION OF VEHICLES Installation...
-
Page 2: Network Connection
POWER CONNECTION 1. Use the Ethernet connector to connect the VTR 600 to the local network. 6. The VTR 600 is powered through a sleeve cable, using a powerso urce in the vehicle's infrastructure (battery or cigarette lighter). The device, when connected to the cigarette lighter, won't function correctly in vehicles equipped with the Start-Stop system. -
Page 3: Wi-Fi Network Configuration
SUPPLY BY CIGARETTE LIGHTER WI-FI NETWORK CONFIGURATION 12. Access the VTR 600 interface in a Google Chrome browser (version 85 or higher) with factory default data: 10. Make the power connections with a 12Vdc Power Cable, adapted for 20. Access the device's web interface using the data registered in the 192.168.0.254... - Page 4 36. The fixation of the VTR 600 is done using a bracket installed at the 30. Access the device's web interface using the data registered in the device's base, with an auxiliary cable, and 4 magnets at the vehicle's roof network interface setup.
-
Page 5: Care And Maintenance
LGPD * Keep the VTR 600 device powered on at all times during the technicians, a defect is found under normal conditions of use.
Need help?
Do you have a question about the VTR 600 and is the answer not in the manual?
Questions and answers