Operations - Sansui TU-70 Operating Instructions And Service Manual

OPERA TIONS
AM BROADCAST RECEPTION
1. Set the '~SELECTOR" switch at "AM".
2__ Adjust the amplifier, stereo set or other
equipment so that it can operate with the
tuner.
3. Set the àmplifier, stereo set or other equip-
ment to monaural operation.
4. Tune to the station of your choice by means
of the "TUNING" knob using the dial and
the Tuning Indicator.
5. Use other switches according to your needs.
FM BROADCAST RECEPTION
i. Set the "SELECTOR" switch at "FM".
2. Adjust the amplifier, stereo set or other equip-
ment so that it can operate with the tuner.
3. Set the amplifier, stereo set or other equip-
ment to monaural operation.
4. Tune to the station of your choice by means
of the "TUNING" knob using the dial and
the Tuning Indicator.
5. Use other switches according to your needs.
FM MPX STEREO RECEPTION
".
1. Set the "SELECTOR" switch. at "MPX".
2. Adjust the amplifier, stereo set or other equip-
ment so that it can operate with the tuner.
3. Set the amplifier, stereo set or other equip-
ment to stereo operation.
4. Tune to the station of your choice by means
of the "TUNING" knob using the dial and
the Tuning Indicator.
The moment you are tuned to an FM
stereo station, the FM Stereo Indicator
lights up. It does not light up in other cases.
-9-
5. Use other switches according to your needs.
N.B.-Read the instrU:ctions for the amplifier,
stereo set or other equipment before you
use it in combination with the tuner.
TAPE RECORDING
When you use a tape recorder to record broad-
casts, connect it to the tuner as described before.
When you want to monitor the recording, connect
earphones to the tuner in the same way. It is
better to make recordings through the tuner than
through the connected amplifier.