Drive DeVilbiss Healthcare TF001 User Instructions

Intended Use and Environment

This product has been developed for those
who have difficulty using a conventional
toilet.
This sturdy and lightweight frame provides
horizontal support, helping you to lower and
raise from the toilet seat.
It features height adjustable legs with ferrule
tips for comfort and security. The product is
constructed from sturdy steel and it is
suitable for users up to 30 stone (190kg).

Assembling the Frame

1. Attach two side
sections of the
frame together
using the two
horizontal
bars. Secure
the bars by
inserting the 4
'E' clips (as
shown below)
Toilet Frame User Instructions
2. Insert the four legs in to the bottom of
the frame and secure using the four 'E'
clips.

Installing the toilet frame:

To fit around the toilet
Remove the 'E' clip in the centre of the toilet
frame. Pull apart and separate the two
halves of the toilet frame. Install the frame
around the toilet and reconnect the two
halves with the middle section located in
front of the toilet bowl. Adjust the toilet frame
to the required width and secure by
reinserting the 'E' clip.
Issue 2021-10 Rev2