TWS: (True Wireless Speaker)
It needs two speakers to make a TWS. When you had twospeakers, you can make
a TWS as below steps:
1. Don't connect to this speaker with Bluetooth devices.
2. Turn on both speakers and press the mode button to changeto Bluetooth mode.
3. Press and hold one speaker's play/pause button for 3seconds and wait for both
speakers to connect each other. It will have a tone coming out from these speakers
after connected successfully.
4. Turn the Bluetooth devices to search the Bluetooth name"TK-502" and tap to
connect it. It will have a tone coming out from this speaker after connected
successfully.
5. Now you can play the music form your Bluetooth devices.
Playing recording function
1. After the portable speaker is tumed on, insert the TF Card or U disk to the TF
slot or USB port, press the Mode button to the Bluetooth mode, connect it with
your Bluetooth device and paly the music, press the REC button seconds you will
here a prompt voice "ding" means the TF card/USB is starting recording, you will
here prompt voice"ding ding", that means stop recording.
2. If you want to play this recording sound, press the Mode button to the USB or TF
card mode, press the next button to find out this song and play it.
Note:
a)When your TF card and U disk insert to the speaker at same time, it will record to
your U disk when recording
b)The recording only works in Bluetooth mode, can not record in FM, Aux mode and
can't record Microphone's sound.
c)It's better to tum the Bleutooth devices volume to maximum during recording
d)It will be stopped recording when pressing the mode button during recording.
Specifications:
Power:
40W
Frequency Response
for main speaker:
45Hz-20KHz
Power Supply:
DC 9V
3
PORTABLE BATTERY SPEAKER
User Manual
TK-502
Need help?
Do you have a question about the TK-502 and is the answer not in the manual?
Questions and answers