Table of Contents
Advertisement
Flash with Other Modes
When you want to control the
shutter speed to create a special
effect, use shutter speed-priority
AE. Set the desired sync speed
anywhere from 30 sec. up to the
camera maximum sync speed.
The camera sets the aperture
automatically to suit the back¬
ground light level. The E-TTL
autoflash control system regu¬
lates the flash output according
to the shutter speed you set for
optimum flash exposure.
Set the camera to Tv
(Shutter speed-priority
AE) and set the desired
sync speed anywhere
from 30 sec. up to the
camera maximum sync
speed.
i
■
1
1
|
cue-ttl
inn q 11
HLET
G"irl
O G
cto
V
J
.
z
Make sure that the pilot
lamp is lit.
Press the shutter button
halfway to focus on the
subject.
Check that ^ is displayed
in the viewfinder and make
sure that the aperture
value is not blinking in the
viewfinder. Then, press the
shutter button completely
to take the picture.
[=1 The aperture value blinks in the viewfinder to alert you of a possible over-
'-v
exposed or underexposed background. Change the sync speed until the
aperture value stops blinking and remains displayed
18
Advertisement
Table of Contents
