Download Print this page

Lockton E Series User Manual

Smart door lock
Hide thumbs Also See for E Series:

Advertisement

Quick Links

Smart Door Lock
ELEV36
Art.
USER MANUAL

Advertisement

loading

Summary of Contents for Lockton E Series

  • Page 1 Smart Door Lock ELEV36 Art. USER MANUAL...
  • Page 2 ELEV36 Art. Content of ELEV36 box 32-38 mm 39-45 mm 46-52 mm >53 mm PART QTY. Front handle Front rubber gasket Half euro cylinder INSTRUCTIONS C4 keys Cylinder screw Battery cover Rear handle Rear rubber gasket Key fobs Screw-spindle packs (see table) Door Face Arrow up Door Face...
  • Page 3 ELEV36 Art. Content of Screw & Spindle packs Door Thickness Spindle Connecting Pillar Screws 32-38 mm 50mm 5x5 25mm 2pcs "M5*25mm 1pc M5*30mm 1pc" 39-45 mm 55mm 5x5 35mm 2pcs "M5*25mm 1pc M5*40mm 1pc" 46-52 mm 65mm 5x5 45mm 2pcs "M5*25mm 1pc M5*40mm 1pc"...
  • Page 4 ELEV36 ELEV36 Art. Art. Detailed step-by-step Installation guide STEP 1. STEP 2. Work out the desired fitting position by Measure the door thickness & mark the using both the printed template & the ELEV36 centre of the doors edge. Use the template to align handle.
  • Page 5 ELEV36 ELEV36 Art. Art. STEP 7. STEP 8. Use the marked Horizontal line to align the Drill the 14 x 19 mm holes in the edge of template & mark the 8 x holes on the front of the the door using a speed bore. set the depth to 25mm door.
  • Page 6 ELEV36 ELEV36 Art. Art. Detailed step-by-step Installation guide STEP 12. Check the handing of the door as per below image & adjust the latch handing as required. lift the latch shifting plate to allow the latch to completely push into the mortice body.
  • Page 7 ELEV36 ELEV36 Art. Art. STEP 14. Follow the steps below as per Figure 1-6 Mortice lock screws front handle connector pillars cylinder cylinder screw Rear handle Rear handle Remove the battery cover from the rear Install the Mortice lock & Cylinder to the Install the 2 x appropriate connector pillars handle.
  • Page 8 ELEV36 ELEV36 Art. Art. Set up through mobile APP TTLock Quick Start Guide The software(iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play. Registration and Login By App Registration and Login By App No lock bound with app Lock bound with app TTLock users can use their phone number and...
  • Page 9: Registration And Login

    ELEV36 ELEV36 Art. Art. Send Key By App After adding the lock successfully, the user has the highest authority of the lock, which is the administrator of the lock. The user can send the bluetooth key to others with setting the time limit, and has the right to select the limited time, permanent or one-time Bluetooth key.
  • Page 10 ELEV36 ELEV36 Art. Art. Optional gateway set up GATEWAY G2 Light Status Model : Dimensions : 70mm x 70mm x 26mm When the Gateway is powered on: Network : WiFi 2.4G Flashing Red/Blue lights: IEEE standard : 802.11 b/g/n Stand-by mode - Ready to Pair Power interface : Type-C USB Blue light: Normal mode...
  • Page 11 ‘E-Series’ ETHERNET BRIDGE - G3 Gateway PRODUCT DESCRIPTION Optional Gateway designed to suit LOCKTON ELEV Series Smartlocks. The G3-GATE enables communication with your Smartlock via Ethernet, allowing you to Change PIN Codes, Add Fingerprints, Create Temporary PIN Codes, Review Audit Trails and other management tasks from anywhere with an Internet connection via the TT Lock App.

This manual is also suitable for:

Elev36