1. Manuals
  2. Brands
  3. PENTA Manuals
  4. Security Sensors
  5. KEEPER
  6. User manual

PENTA KEEPER User Manual

Proximity voltage & current detector
Hide thumbs

Advertisement

Table of Contents

KEEPER User Manual
Proximity Voltage & Current detector

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KEEPER and is the answer not in the manual?

Questions and answers

Summary of Contents for PENTA KEEPER

  • Page 1 KEEPER User Manual Proximity Voltage & Current detector...
  • Page 2 KEEPER detects 360 degrees around the user, indicates the danger, direction and approximate distance of the threat. The location of the KEEPER on the hard hat allows the user to have a peripheral vision, maximizing the visibility. KEEPER has 4 modes of use according to the user's requirement: Rookie, Pro1, Pro2, Pro3. (Each mode has an associated sensibility/distance of detection).
  • Page 3 Low battery will be indicated with an orange blink. NOTE: this will not reduce the operation of the KEEPER, it is only a warning to recharge it. Very Low battery will be indicated with an blink. NOTE: this will disable all functions of the KEEPER until it is charged again.
  • Page 4 Ver 1.0 DISTANCE OF ACTIVATION The KEEPER can be configured in 4 modes of use, according to the user requirements. Each mode has an associated detection distance. First Alert Full Alert The following illustration describe the first and full detection of the KEEPER.
  • Page 5 Connect the KEEPER to a power source using the provided USB-C cable. The blue blinking LED signals charging and readiness for user mode selection. For safety, user modes can only be selected when the KEEPER is connected to the power source, and modifications during normal operation are not allowed.
  • Page 6 SELF-TEST TRUE TEST, the self-test routine, not only tests the sound and LEDs. When starting an self-test the KEEPER internally generates an electromagnetic field that tests the voltage and current sensors, making it a 100% real test. To run self-test, press and realease "MAIN" button...
  • Page 7 Ver 1.0 AUXILIARY MODES The KEEPER has 3 auxiliary modes, such as flashlight, "SOS" signal and sound beacon. To enter auxiliary modes, keep pressing MAIN button for two TEST cycles. Press AUX button to cycle through the different modes: Lantern S.O.S...

Table of Contents