Table of Contents
Set Up
|
|
Preparation
Using the Remote with VCR or Cable TV
SOFIE cao
Basic Operation
Installing Your TV Set
t
Where to install
Place the TV on the floor or on a sturdy platform.
The mounting surface should be flat and steady.
Lighting
|
Do not place the TV in a room where direct lighting
strikes the screen. Use soft and indirect lighting.
Air circulation
Place the TV far enough from the wails to allow
proper ventilation. This will prevent the TV from
overheating and avoid possible damage to the TV.
Avoid dusty places too.
Power supply
Plug into an electrical outlet with standard house-
hold power (120 volt AC, 60Hz). Do not change the
plug's safety prong. See the right column.
Equipment Connections
Connecting Video Equipment ............:ccsessseen 27
Reference Section
WARNING
: TO AVOID PERSONAL INJURY
@ Do not stand or climb on the TV.
® Do not put a VCR or any heavy object on top of
the TV.
CAUTION :
As a Safety feature, the plug has one prong wider
than the other. It will fit only one way into a stand-
ard electrical outlet. If the plug will not fit into the
outlet, try turning it around. If the plug will not fit
either way, the outlet is probably old and non-
standard.
You will need to
have a new outlet
installed by an
electrician.
DO NOT CHANGE
THE SAFETY
FEATURE OF THE
PLUG.
Wide prong
®
7)
r
5
oO
>
£
r
%
=