Operating The Hob - Beko DVC665 Installation & Operating Manual

Table of Contents

Advertisement

operating the hob
Control knobs
1
Rotate in either direction to switch on
and select a heat level.
• The four heating zones have 6 fixed
positions.
2 When any one of the heating zones is
on, the red indicator light on the control
panel is on.
3 To switch a heating zone off turn the
corresponding knob to o .
Before retiring for the evening it is
advisable to check that all the cooker
controls have been switched off.
• A slight buzzing sound can be heard if
any of the heating zones comes on. This
is normal and not a fault.
For best simmering, we recommend you
use the rear left heating zone.
Rapid
zone
Normal
zone
Use
1
1
Warming
1,2
2-3
Simmering
2,3
4-5-6
Cooking-Frying-Boiling
Diameter 140mm 1200W
Diameter 180mm 1700W
Use 6" diameter saucepan
Use 7" diameter saucepan
Diameter 180mm 1700W Rapid
Diameter 140mm 1200W
Use 7" diameter saucepan
Use 6" diameter saucepan
Hob hot indicator lights
For your safety, these illuminate to show
which hob is hot. They remain alight even
when the hob is switched off. The light will
go off when the temperature falls below
64°C.
Do not touch and keep children away from
the heating zones and appliance at all times.
9
At the end of the cook period the
A
symbol
will flash and an intermittent bleeping sound
will be heard. The & symbol will go out.
The bleeping sound will continue for several
minutes unless cancelled (see Step 6). The
A
symbol will continue to flash until the timer
is returned to manual operation (see below).
Press the Ocook period button
to cancel the bleeping.
Step 7
Turn the oven control to the OFF
position.
Step 8
Press the fffj cook period and end
time buttons together to return the
cooker to manual operation. The
A
symbol will go out and the^
symbol will light up.
When cooking automatically the cook period can be checked at any
time by simply pressing the
cook period button. To cancel the
auto cooking programme before or after automatic cooking starts,
press the O cook period and l^T end time buttons together.
This will return the cooker to manual operation.
0000®
0
izj HET —
+
18

Advertisement

Table of Contents
loading

Table of Contents