Samsung MXD-K025AN Installation Manual page 23

Option SEG7
Explanation PAGE
Indication Details
Indication
and Details
1
Option SEG13
Explanation PAGE Use of external control
Indication Details Indication
Indication
and Details
2
Option SEG19 SEG20
Explanation PAGE
Indication Details
Indication
and Details
3
Minimizing fan operation when thermostat is off
(*1)
– Fan operates for 20 seconds at an interval of 5 minutes in heating mode.
– Fan stops when thermostat is off in cooling mode.
– Make sure to connect the wired remote controller or the external room temperature sensor if you use the function
of external room temperature sensor or minimizing fan operation. (In order to implement the functions the option
of using temperature sensor inside the wired remote controller must be set. Refer to the installation manual of the
wired remote controller.
1: Fan is turned on continually when the hot water heater is turned on,
(*2)
3: Fan is turned off when the hot water heater is turned on with cooling only indoor unit
Cooling only indoor unit: To use this option, install the Mode Select switch (MCM-C200) on the outdoor unit and fix it as cool mode.
When the following 2 or 3 is used as external heater On/Off signal, the signal for monitoring external contact control will not
(*3)
be output.
2: Fan is turned on continually when the external heater is turned on,
3: Fan is turned off when the external heater is turned on with cooling only indoor unit
Cooling only indoor unit: To use this option, install the Mode Select switch (MCM-C200) on the outdoor unit and fix it as cool mode.
• If Fan is set to off for cooling only indoor unit by setting the SEG9=3 or SEG15=3, you need to use an external sensor or
wired remote controller sensor to detect indoor temperature exactly.
SEG8 SEG9
- Use of hot water heater
Indication Details
0 Disuse
- 1 Use
(*2)
2 -
3 Use
(*2)
SEG14
Setting the output of external control /
External heater On/Off signal
Setting the
Details Indication
output of
external control
0 Disuse 0 Thermo on
1 Operation on
ON/OFF
1
Control
2
2 OFF Control 3
SEG21
Heating setting EEV opening of an indoor unit stopped during
-
compensation
Indication Details Indication
0 Disuse
- 1 2 °C
2 5 °C
- -
SEG10
- EEV Step when heating stops
Indication
0
1
SEG15 SEG16
-
Details
External heater
On/Off signal
-
-
-
- Use
(*3)
- Use
(*3)
SEG22
oil return or defrost operation.
Details
0 Default value
Oil return or Noise
1
decreasing in defrost mode
SEG11 SEG12
-
Details
Default value
-
Noise decreasing
setting
SEG17 SEG18
Number of hours using
Buzzer control
filter
Indication Details Indication
0 Use buzzer 2 1000 Hour
Disuse
1 6 2000 Hour
buzzer
SEG23 SEG24
- -
- -
English
Details
23