Advertisement
Quick Links
Advertisement
Summary of Contents for Sunlab SU 1402
-
Page 8: Installation
3. STANDARD PARTS LISTING Removable Hinge ---Rollers Rivet-��W-- Screw Front Side ON/ OFF Switch Power Port Back Side 4. INSTALLATION Gently remove the upper packaging and take out the tube roller by holding it from the bottom. When this equipment is used for the first time, ensure that all the packaging accessories are removed from the product. -
Page 9: Location And Mounting
4.1 LOCATION & MOUNTING Place the device on a flat and leveled surface and ensure that all four feet stand on the surface firmly. Avoid installing on a slippery surface or surface prone to vibration. ° ° 1. Ideal ambient temperature is 20 C ±... -
Page 10: Installing Rollers
1) Unscrew the rivet screw counter anticlockwise 2) Open hinge, 3) Push the roller gently on hinge side, 4) Pull the roller up, 5) Pull the roller out of the side opposite to the hinge. Below image shows the process to remove rollers. 1.
Need help?
Do you have a question about the SU 1402 and is the answer not in the manual?
Questions and answers