Page 1
80400FB-WHD Fence Stabilizer System For Jointers Introducing the new Wahuda Fence Stabilizing System . Help in preventing movement of the fence during operation and can be installed on Wahuda Machines and most competitive models at very affordable prices. 135° 90°...
Page 2
Nut M5 x 2 6 INCH JOINTER HOLES LOCATION DIMENSIONS WAHUDA 50160CC-WHD 6 inch jointer (Cast iron tables) -Instruction A WAHUDA 50160CC-WHD 6 inch jointer (Cast iron tables) -Instruction A RIKON 20-600H 6 inch jointer(Cast Aluminum tables) – Instruction B GRIZZLY G0946 6 inch jointer(Cast Aluminum tables) –...
Page 3
10mm INSTRUCTION A ( FOR CAST IRON TABLES) Our Fence Stabilizer System is very easy to install on our Wahuda machines. You simply drill a 4.3mm diameter hole following the location dimensions of the sketches that match the model of machine you have in the infeed and outfeed tables, then using the provided M5 tapping screw to tap a thread in the table to attach the stabilizing bracket .
Page 4
WAHUDA FENCE STABILIZER 1. First step is to locate where to drill a 4.3mm diameter hole referring to the appropriate sketch for the size machine you have. 2. Take the included tapping screw and install it to tap the hole in the table to accept the locking knob.