Maintenance - Echo PB-2520 Operator's Manual

Power blower

Hide thumbs Also See for PB-2520:

Table of Contents

MAINTENANCE

Use only during appropriate hours.

To reduce sound levels, limit the number of pieces of equipment used

at any one time.

Allow the engine to warm up at a fast idle for a few minutes.

Control engine speed with

throttle trigger (G), or for

continuous use, set engine

speed with throttle position

lever (B). Rotate throttle

position lever forward for lower

speed, back for higher speed.

Use lower speed to blow debris

from hard surfaces.

Additional speed may be

necessary to clean debris, snow, etc. from lawns and flowerbeds.

Note: Never use a higher speed setting than necessary to perform a

task. Remember, the higher the engine speed, the louder the

blower noise. Minimize dust by using blower at lower speeds.

Keep debris on your property. Be Smart - be a good neighbor.

MAINTENANCE

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

Always stop engine, disconnect spark plug, and make sure all

moving parts have come to a complete stop before removing

obstructions, clearing debris, or servicing unit. Allow unit to

cool before performing service. Wear gloves to protect hands

from sharp edges and hot surfaces.

Operating a poorly maintained unit can result in serious injuries

to operator or bystanders. Always follow all maintenance

instructions as written, otherwise serious personal injury can

result.

PB-2520

X7501192101

Table of Contents