Advertisement
• Fit the tree base onto the tabs near the tree, as shown. Push to "snap" in place.
For best performance, we recommend replacing the batteries that came
with this toy with two, new "AA" (LR6) alkaline batteries.
• Locate the battery compartment on the bottom of the vehicle.
• Loosen the screw with a Phillips screwdriver and remove the battery compartment
door. Remove the exhausted batteries and dispose of them properly.
• Insert two, new "AA" (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw. Do not over-tighten.
• If the vehicle begins to operate erratically, you may need to reset the
electronics. Remove the batteries and replace them in the vehicle.
• When sounds from the vehicle become faint or stop, it's time for an adult to
change the batteries.
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
Assembly
Battery Replacement
1,5V x 2
"AA" (LR6)
Advertisement
