Cub Cadet Yanmar SC2400 Operator's Manual page 37

6. Turn off the Power Take Off (PTO)
switch.
Push in and set the Power Take Off (PTO) switch to
the OFF position.
(A) Power Take Off (PTO) switch
(a) OFF position
(b) ON position
7. Fully push the 3-point hitch control /
cutting height adjustment lever
forward to the lowest position and
lower the mid- or rear-mounted
implements to the ground.
(A) 3-point hitch control / cutting height
adjustment lever
(a) Lowest position
CAUTION
●In order to prevent a turnover accident,
completely lower the implements to the
ground.
8. If the tractor has any implements that
use the implement control lever, lower
them to the ground. Then, set the
implement control lever to the
NEUTRAL position and push in the
implement lock lever to lock.
(A) Implement control lever
(B) Implement lock lever
(a) Lower the implement to the ground
7. OPERATING THE ENGINE
3014919g
3014926
3014918b
3014903d
7-4
(A)
(a) (b)
(A)
(a)
Sc2400 Operator's Manual
(a)
(A)
(B)