Anti-scale systems chemical-free, salt-free scale prevention (25 pages)
Summary of Contents for Watts DOLOMIT IGD Series
Page 1
FLOAT SWITCHES 01D351-GB FLOW SWITCHES FOR LIQUIDS PRESSURE SWITCHES DOLOMIT FLOW SWITCHES FOR LIQUIDS FLOAT SWITCHES Flow switches interrupt an electrical control circuit when the water The DOLOMIT float switches find circulation fails in the circuit for some abnormal condition (e.g. stop- application in liquid level control in ping of motor-driven pumps).
Product reliability is ensured thanks to the sound expe- Contact load rating 16 (4) A at 250 V~ rience of WATTS Cazzaniga in the sector as well as to the stringent testing programme to which both the process Max. operating temperature 80°C...
Page 3
Product reliability is ensured thanks to the sound expe- Storage temperature range -20°C ÷ +80°C rience of WATTS Cazzaniga in the sector as well as to the Type of electrical duty Light stringent testing programme to which both the process and product are submitted.
APPLICATION AND OPERATION Part No. Size Protection Flow switch for liquids, for FLU is a flow switch which interrupts the electric control piping from 1" to 8". 0401125 1” IP64 circuit of the burner when there is insufficient water 0401126 1”...
Page 5
APPLICATION AND OPERATION Part No. Size Protection FS25 Flow switch for liquids, for The FS25 series refers to a flow switch which interrupts piping from 1" to 6". 1505825 1” IP55 the electric control circuit of the burner when there is Can be used in moist insufficient water circulation in the boiler circuit owing to environments.
Page 6
APPLICATION AND OPERATION Part No. Size Pressure switch with Pressure switch Series PRM is a switch with normally manual setting for heating 0402101 1/4”F closed contact; when the pressure of the system exceeds systems. the set pressure, the contacts are opened, thus interrup- ting the circuit.
Page 7
APPLICATION AND OPERATION Part No. Size Power Pressure switch for The pressure switch automatically controls operation of pumps and autoclaves 0402202 1/4” 250V single phase the motor-driven pump according to given set pressures. with adjustment range 0402105 1/4” 500V three phase When the minimum set pressure is reached, the contacts from 1 to 5 bar.
Page 8
The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding. WATTS CAZZANIGA reserves the right to carry out any technical and design improvements to its products without prior notice.