SINJI SIDC-0100 User Manual

DOORBELL CAMERA
User Manual
CONTENTS
1x Sinji Doorbell Camera
1x Chime
1x USB-A to USB-C charging cable
1x Wall mounting plate
2x Mounting screws
2x Wall plugs
1x Securing screw
1x Double-sided tape pad
1x User manual
Go to support.installtuya.com, or scan the QR-code for a manual in French, German, Spanish,
Italian, Dutch or Polish.
A
France
German
Spanish
Italian A
Dutch
Polish
1. Microphone 6. Reset button 11. Pairing button
2. Camera 7. Speaker 12. Volume button (mute, low, medium
3. Light sensor 8. USB-C charging port & high)
4. Doorbell button 9. Status LED chime 13. Jingle selection button (20 jingles)
5. Status LED 10. Speaker chime 14. USB-A power connector
1)
2)
3)
5)
4)
6)
9)
11)
12)
13)
14)
10)
7) 8)
TECHNICAL SPECIFICATIONS
Model SIDC-0100 / SIDC-0109
Power supply 5V DC (USB charger)
Doorbell – chime range 100m (unobstructed)
Battery 3.7V Lithium (rechargeable)
Battery capacity 800 mAh
Battery life ~1 month @5x/day for 2 minutes at a time
[or] ~300 minutes continuous use time
Video stream quality 1280*720 / 30 fps
Video type Activate and stream on call only
Infrared vision 850nm, 5m effective distance
Connectivity Wifi 2.4 GHz
IP rating IP53
Main material Plastic
Dimensions doorbell 85x54x24 mm
Dimensions chime 55x43x25 mm
Gross weight 106 gr
Camera angle 90°
USER MANUAL
1. Connecting the Sinji Doorbell Camera to the app
2. Pairing the doorbell camera and the chime
3. Installing the Sinji Doorbell Camera
4. Operation instructions
5. Cleaning and maintenance
6. Trouble-shooting
7. Disposal of electrical and electronic equipment
8. Safety warnings
1. CONNECTING THE SINJI DOORBELL CAMERA TO THE APP
1.1. Download the Smart Life app for iOS or Android for free.
1.2. Follow the instructions shown in the app.
1.3. Add the Sinji Doorbell Camera to the app in one of 2 ways:
A. By scanning the QR code
B. Manually adding the Doorbell Camera
A. Scanning the QR code
1. Switch the doorbell camera on by ringing it.
2. Make sure your smartphone is connected to your Wi-Fi network (2.4 GHz).
3. Open the Smart Life app and press '+' sign in the top right of the main screen to add a device.