Advertisement
NOTE: Please review instructions to ensure best results.
REMARQUE : Pour obtenir de meilleurs résultats, lire toutes les instructions.
NOTA: Favor de revisar las instrucciones para asegurar los mejores resultados.
On/Off Switch
Interrupteur ON/OFF
Interruptor de
encender/apagar (on/off)
Light Screen
cran lumineux
É
Pantalla con luz
Battery Case
Compartiment des piles
Compartimiento de pilas
Plus more tracing sheets at • Plus d'autres feuilles à tracer sur le site • Hay más hojas para trazar en Crayola.com/tracing
Additional Items Needed: 3 AA alkaline batteries & Phillips screwdriver (Not included) • Autres fournitures requises : 3 piles alcalines AA et tournevis Phillips (Non compris)
Artículos Adicionales Requeridos: 3 pilas alcalinas AA y destornillador Phillips o de cruz (No incluidos)
Insert Batteries
CAUTION: BATTERIES MUST BE
INSTALLED BY AN ADULT ONLY.
1. Use Phillips screwdriver (not included)
to loosen battery cover screws
underneath the pad.
2. Remove the used batteries and dispose
of properly. Insert three (3) AA alkaline
batteries. Ensure that direction matches
diagram inside battery case.
3. Replace battery cover and tighten
the screws.
Contents • Contenu • Contenido
10 Design Template Sheets
10 feuilles de modèles
10 hojas de patrones de diseños
How to Use Your Light-Up Tracing Pad
1
.
Slide light switch
to "On" position.
3
.
Trace, then replace!
Swap the first design
sheet with new ones
to add different details.
Tablette à tracer lumineuse
La puissance d'éclairage DEL dans une tablette ultra-mince
Tableta Iluminada para Calcar
Luz LED de Alto Brillo en una Tableta Ultra Delgada
10 Blank Tracing Sheets
12 Colored Pencils
10 feuilles à tracer
12 crayons de couleur
10 hojas en blanco para trazar
12 lápices de colores
For Best Results
For Best Results
• Use one design sheet & one drawing sheet at a time.
• Trace outline lightly with a pencil & color as desired.
• Any standard writing or copier paper may be used with the Tracing Pad.
• Also use Crayola Crayons, Markers or Colored Pencils for tracing & coloring.
• Turn Tracing Pad to "Off" position when not in use.
• Wipe any marks or dust off screen with a soft, damp cloth. Do NOT
immerse Tracing Pad in water.
Graphite Pencil
Crayon à mine de graphite
Lápiz de grafito
2
.
Lay a design sheet on
the screen. Cover with
a blank tracing sheet.
4
.
When your design
is just the way you
want, color it in.
Advertisement
