Do you have a question about the T037A and is the answer not in the manual?
Questions and answers
Arash Gillan
January 17, 2025
how to burn a cd
1 comments:
Mr. Anderson
May 14, 2025
To burn a CD using the Unitek T037A:
1. Connect the drive to your computer using the included USB A to micro B power supply cable. If using a hub, ensure external power is supplied via the Micro USB port. 2. Place the drive on a flat, stable surface away from strong magnetic fields. 3. Insert a blank CD into the tray after clicking the drive icon and selecting "pop" to open it. 4. Use CD burning software on your computer to burn data or media files to the CD. 5. If the software does not detect the drive, ensure it is connected to a rear USB port (for desktops) and that adequate power is supplied.
A media player like VLC can be used to verify content after burning.
English Thank you for choosing Unitek External Compact Disk Drive. Please read the user manual carefully before use and save them. If you need any help, please contact our professional customer service team at: support_us@unitek-products.com Product Diagram...
A: Indicator Light B: Switch Button C: Anti-jam Slot D: Micro USB Powered Port E: Cable Take-out F: USB Type C-Male G: USB Type A-Male H: USB C I: USB2.0 A J: USB 3.0 A K: SD card reader Product Features 1.
USB 3.0/Type-C interface. 5. Using pure copper mesh technology, low impedance, strong protection, to provide more stable data transmission. How to use 1. This product is a data line interface properly connected to USB port of the computer, the computer display lower right corner should appeor device icon.
Q&A Why the external DVD drive does not work when connected to the computer? 1. Re-insert the external drive,"Into Combo Device Class"will reappear in "Device Manager". 2. Click on the small ">"next to it,and you will see something called "Into Default Controller"appears below. 3.
Warranty The Unitek External Compact Disk Drive covered by Unitek warranty for 24 months. If the product fails due to manufacturer defects, please contact us by email at: support_us@unitek-products.com...
Need help?
Do you have a question about the T037A and is the answer not in the manual?
Questions and answers
how to burn a cd
To burn a CD using the Unitek T037A:
1. Connect the drive to your computer using the included USB A to micro B power supply cable. If using a hub, ensure external power is supplied via the Micro USB port.
2. Place the drive on a flat, stable surface away from strong magnetic fields.
3. Insert a blank CD into the tray after clicking the drive icon and selecting "pop" to open it.
4. Use CD burning software on your computer to burn data or media files to the CD.
5. If the software does not detect the drive, ensure it is connected to a rear USB port (for desktops) and that adequate power is supplied.
A media player like VLC can be used to verify content after burning.
This answer is automatically generated