Summary of Contents for Pecron DC1242-500
- Page 1 SMART CAR CHARGER DC1242-500 USER MANUAL Please read the user manual thoroughly before using support@pecron.com...
-
Page 2: Function Introduction
About 0.1mA under shuntdown model and 260mA under state of power-on but without any load. Operating Temperature -10℃~55℃ / 14℉~131℉ Storage Temperature 10℃~45℃ / 50℉~113℉ Heat Dissipation Fan cooling Protective design Short-circuit protection, over-voltage protection, under-voltage protection, overheating protection. 193*90*52 mm / 7.6*3.5*2 in Dimension Warranty 12 months support@pecron.com... -
Page 3: Working Principle
WORKING PRINCIPLE 1: PECRON smart car charger (hereinafter referred to as car charger) can detect the input voltage. If the input voltage is greater than the set starting voltage, the car charger will work, otherwise it will not work. 2: The battery voltage will be in a lower range when the car is not started, and the voltage will be pulled up after the car is started. - Page 4 14V~17V / 28V~30V ※ When setting the starting voltage, please debug in this way, If the setting voltage is too low, the car battery power will be drained, resulting in the car not being able to ignite and start normally. support@pecron.com...
-
Page 5: Packing List
PECRON's current product literature. In compliance with laws and regulations, PECRON reserves all rights for final explanation, and to change these terms and conditions at any time without prior notice. In the event that any revisions are made, the revised terms and conditions shall be posted on our website immediately, please visit our website to inform yourself of any changes. - Page 6 11：When it's not using for a long time (more than a week), please turn off the main switch of the charger. EXCLUSIONS PECRON’ s warranty does not apply to： Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in PECRON’...
- Page 7 support@pecron.com...