Table of Contents
Advertisement
Basic setting
Status Light
Start programme
Tone volume
Button volume
Child-proof lock
Wi-Fi
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)
Selection
1
on
off
1
Eco 50
Last selected pro-
gramme
Scale with multiple
levels.
Scale with multiple
levels
on
1
off
on
off
off
Manual
Permanent
1
on
off
Reset
Description
Switch "Status Light" on or off.
While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appliance
door is not completely closed, the
strip of light will flash. The programme
has ended when the strip of light is no
longer visible on the left-hand side.
Set a default programme for when the
appliance is switched on.
Set the signal volume at the end of
the programme.
Level 0 switches the signal tones off.
Set the button volume during opera-
tion.
Level 0 switches the button tones off.
Switch the Electric childproof lock
→ Page 11 on or off.
Switch the wireless network connec-
tion on or off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connected
to the Home Connect app.
→ "Home Connect ", Page 40
Activate or deactivate
→ "Remote Start ", Page 41.
This basic setting is not available until
after you have connected the device
with the Home Connect app.
→ "Home Connect ", Page 40
Switch display of the brand name logo
on or off when the appliance is
switched on.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must be
configured.
Basic settings en
39
Advertisement
Table of Contents
