Table of Contents
Advertisement
22
You must point the remote control toward the amplifier and
be within about 7 meters (23. feel) of it for proper operation.
pera DN A
mech
és o 0
OSS
A
daa |
$f tam
ra
=
y
UL
E. atk
y
EA:
e
Se |
|
A
t annarar
Aranarena
nrnna
anatata E ninini anran tthe
AMPLIFIER
You can control five operations of your amplifier as well as
turn the entire system on and off with your Remote Control.
1. Press the POWER button to tum the amplifier and
connected equipment on. Press it again to tum
everything off.
2. Select the audio source that you wish to listen to by
pressing one of the INPUT source selector buttons, such
as CD, PHONG TAPE 2, TAPE 1, AUX, TUNER, VCR 2,
VOR 1, VDP and TV.
3. Select the video source that you wish to watch by
pressing one of the PICTURE source selector buttons,
such as VOR 2, VCR 1, VDP and TV. Pressing the OFF
button turns off the video portion of the amplifier.
4. Press the AUDIO MUTING button to lower the output
volume by about 20 dB, Press it again to restore the
volume to the preset level.
5. The VOLUME buttons are used to contro! the over-all
output volume of the amplifier and to turn the VOLUME
control itself. Press the DOWN buttón to lower the output
volume and turn the control counterclockwise. Press the
UP button to increase the output volume and turn the
control clockwise.
6. The REAR LEVEL buttons are used to contral the outout
volume to the rear speakers only. Press the DOWN
button to lower the rear speaker output volume, Press
the UP button to increase the volume.
TUNER
You can select the preset station frequencies of your tuner
py using the TUNER PRESET buttons on the remote
contro?
1. The A/B button selects which set of stations you can
tune to. Press it to alternate between them.
2. Press the DOWN and UP buttons to select the actual
station number from among those selected with the A/B
button. Press the DOWN
button to scan down the
numbers (Le. 16 to 15 to 14, etc.) and press the UP
button to scan up the numbers (Le 2 to 3 to 4, etc.).
PHONO
|
You can cause the turntable to begin or stop play with the
PLAY/CUT button on the remote control. Press it to alternate
between beginning play and stopping play.
GD
You can control a number of compact disc player
operations witn the CD buttons on your remote control.
1, Press ihe + and — buttons to scan the laser pickup
across the tracks of a compact disc. The + button
scans from the beginning toward the end, and the —
button scans from the end toward the beginning.
2. Press the D> and << buttons to scan the laser
pickup through a selection on a compact disc at a .
higher than normal speed. The [>
button scans in a
forward direction, and the <]<] button scans in a
reverse direction.
s. Press the PLAY button to begin, or resume, playing a
compact disc.
4. Press the PAUSE/STOP button once to temporarily stop
playing a compact disc and leave the laser pickup at
that point. Press it again to stop playing completely and
move the laser pickup back to the beginning of the first
track on the compact disc,
TAPE
|
You can control a number of cassette tape deck operations
with the TAPE buttons on your remote control.
1. Press the A-B button to select which tape of a double
cassette unit you will be listening to. Pressing this
.
button alternates between tape unit A and tape unit B. >
2. Press the DIR A and DIR B buttons to change direction
of tape movement in decks A and B of a double
cassette deck. DIR A changes the direction of the tape
in deck A and DIR B changes the direction of the tape
in deck B.
l
3. Press the (>
and <
buttons to fast forward and
rewind through a cassette tape. The >
button moves
the tape in a forward direction, and the <j button
moves the tape in a reverse direction.
Advertisement
Table of Contents
