Summary of Contents for ParkerBrand PAC-96-24
- Page 1 CLICK TO CHANGE TEXT AIR COMPRESSOR AIR COMPRESSOR P A C - 9 6 - 2 4 / P A C - 9 6 - 5 0 O W N E R S M A N U A L...
-
Page 2: Table Of Contents
The information contained in this manual was accurate at the time PARTS INDEX ..................37 of production, however Parker Products Ltd. may make modifications to the Thank you ONLINE RESOURCE LIBRARY .............. 38-39 product without notification. ParkerBrand SPECIFICATIONS ................... 42 GUARANTEE ................... 43 DECLARATION OF CONFORMITY ............45... -
Page 3: General Safety
GENERAL SAFETY GENERAL SAFETY WARNING • RESPIRATOR READ THIS MANUAL CAREFULLY BEFORE USING THIS MACHINE. To reduce the risk of injury, user must read instruction • Never allow children or anyone who does not fully understand the directions given in the manual to use the machine. Protect you lungs against dust. -
Page 4: Safety Symbols
SAFETY SYMBOLS SAFETY SYMBOLS This symbol, before a safety comment, indicates a PRECAUTION, a or a DANGER. Ignoring this WARNING EXTREME PRESSURE. To reduce the risk of injury, RISK OF INJURY. DO NOT OPEN OR REMOVE SAFETY WARNING! warning can lead to an accident for yourself or for others. Servicing while pressurised can cause severe injury. -
Page 5: For Safe Operation
FOR SAFE OPERATION FOR SAFE OPERATION Prior to use all operators should become familiar with the Cluttered areas invite accidents, clear WARNING! TRAINING: KEEP THE WORK AREA CLEAN: vapours or solid particles. Always work in good ventilation, especially instructions in this booklet. In particular, become familiar with the ON/OFF the work area of all unnecessary tools, debris and furniture. - Page 6 FOR SAFE OPERATION FOR SAFE OPERATION Check the During operation, the motor, When not in use the air KEEP ALL SCREWS AND COVERS TIGHTLY IN PLACE: DO NOT TOUCH HOT SURFACES: STORE THE AIR COMPRESSOR PROPERLY: EACH USE CHECK THE AIR COMPRESSOR AND HOSE FOR screws and covers periodically.
- Page 7 FOR SAFE OPERATION Keep the NEVER STOP THE COMPRESSOR BY REMOVING THE PLUG OR CLEANING AND CONDITION OF THE COMPRESSOR: Always use the On/Off external surfaces of the tank clean. Avoid impact damage and do not allow SWITCHING OFF AT THE MAINS SUPPLY: switch on the compressor.
-
Page 8: What's In The Box
AIR FILTER PAC-96-24 - RUBBER FOOT KIT ML COMPRESSOR OIL PARTS PROVIDED WITH ALL PAC-96-24 & PAC-96-50 PARTS PROVIDED WITH PAC-96-24 & PAC-96-50 *Products depicted on this page are for illustration purposes only, models may vary slightly. *Products depicted on this page are for illustration purposes only, models may vary slightly. -
Page 9: Product Features
PRODUCT FEATURES PRODUCT FEATURES *Products depicted on this page are for illustration purposes only, models may vary slightly. *Products depicted on this page are for illustration purposes only, models may vary slightly. -
Page 10: Before Using The Air Compressor
• Running the machine without oil will damage the motor beyond repair • If any part of the Air Compressor is damaged or missing please contact ParkerBrand Customer Service (Page 41). • The oil provided with this machine is for testing only and is not sufficient to run the machine over a long period. -
Page 11: Assembly
ATTACH RUBBER SUPPORT FEET REMOVE AIR FILTER TRAVEL PLUG ATTACH AIR FILTER The PAC-96-24 comes with a singular rubber Attach the wheels using the axle kit provided. Be The PAC-96-50 comes with a two rubber support Remove the white plastic travel plug from the air filter With the white plastic travel plug removed screw the air filter support foot. -
Page 12: Pre-Operation
PRE-OPERATION PRE-OPERATION REMOVE OIL FILLER TRAVEL PLUG FILL WITH OIL FIT RED OIL FILLER PLUG CHECK OIL LEVEL Remove the white plastic travel plug from the oil filler hole. Pour fresh oil into the oil filler hole. If required use a small Push the oil filer plug firmly into place. -
Page 13: Operation
OPERATION OPERATION POWER SWITCH POWER SWITCH ON ( I ) POWER SWITCH OFF (O) ENTER TEXT PRESSURE GAUGES Pull the power switch upwards to turn the machine Push the power switch down to turn the machine The power switch is located on top of the machine into the ON( I ) position. - Page 14 OPERATION OPERATION REGULATOR VALVE KNOB INCREASE PRESSURE DECREASE PRESSURE RATED PRESSURE ADJUSTMENT ADJUSTMENT SCREW On one of the outlets the outlet pressure of The regulator valve knob is located in between the The outlet pressure of compressed air can be The compressor is controlled by a pressure switch.
-
Page 15: Maintenance
MAINTENANCE MAINTENANCE SWITCH OFF CHECK OIL LEVEL LOCATE SUMP BOLT EMPTY USED OIL FILL WITH FRESH OIL CLEAN THE COMPRESSOR Renew lubricating oil after the first ten working Remove the oil filler plug and pour in the oil, use a Before any maintenance operation stop the air The sump bolt is located at the side of the machine. - Page 16 MAINTENANCE MAINTENANCE LOCATE DRAIN VALVE REMOVE CONDENSATION FROM TANK REMOVE AIR FILTER COVER REPLACE / CLEAN FILTER Remove the air filter cover by turning the wing nut in an anti- Slide the replacement filter onto the thread followed by the The drain valve is located on the bottom of the tank.
- Page 17 MAINTENANCE SAFETY VALVE AND PRESSURE GAUGES AIR TANK THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK Have the safety valve and pressure gauge checked by a Make sure there is no rust on the air tank and the air tank certified repair centre every six months to ensure they are is not damaged.
-
Page 18: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION PROBLEM POSSIBLE CAUSE SOLUTION Fault in line or insufficient voltage Check the line Motor running too slow Check and remedy Power wire too thin or long Replace the wire Air filter clogged Clean or replace Motor not running, running slow or Faulty pressure switch Repair or replace... -
Page 19: Parts Index
EXPLODED DIAGRAM PARTS INDEX NAME NAME NAME NAME BOLT M8 x 103 SEALED RING 13 x 2.5 WASHER 10 BOLT ST 3.9 x 19 CYLINDER COVER CRANK CASE COVER SPRING WASHER 10 BOLT M5 x 8 CYLINDER COVER GASKET BOLT M6 x 10 WHEEL ROTOR VALVE PLATE... -
Page 20: Online Resource Library
SCAN QR CODE FOR ACCESS PAC-96-24 PAC-96-50 TO PAC-96-24 RESOURCES TO PAC-96-50 RESOURCES • No resources for your product? Don't worry we are adding new content all the time. • If you require help/advice with your product contact us via email at help@parkerbrand.co.uk... - Page 21 We know that taking care of our customers in a helpful and straightforward manner is much appreciated, just as you, our customer are appreciated in turn. PAC-96-24 SPARES PAC-96-50 SPARES Thank you for buying ParkerBrand we are here if you need us, be sure of it. (+44) 01507 499198 help@parkerbrand.co.uk www.parkerbrand.co.uk...
-
Page 22: Specifications
NOTE: In order for you to effect this guarantee you must provide proof of purchase in the form of a dated receipt or invoice. If repairs are outside of the warranty period a quote will be made accordingly. PARKER PRODUCTS LIMITED *All information correct at time of printing. If you require further information please contact ParkerBrand directly... -
Page 23: Declaration Of Conformity
Max. Working Pressure: 0.8MPa ☑ EN 1012-1:2010, AfPS GS 2014:01 PAK Remark: Indoors only Technical file complied by: Parker Products Ltd Model/Type: PAC-96-24 THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK PAC-96-50 Being the responsible person appointed by the manufacturer. Signed: Manufacturing Date/Serial Number:... - Page 24 P A C - 9 6 - 2 4 / P A C - 9 6 - 5 0 O W N E R S M A N U A L...
Need help?
Do you have a question about the PAC-96-24 and is the answer not in the manual?
Questions and answers