Subscribe to Our Youtube Channel
Summary of Contents for DMD DMDSH1
- Page 1 DMDSH1 2000W Electric Glass Panel Heater with WiFi Control Please read the manual carefully before using this device, and retain for future reference.
- Page 2 This glass panel heater complements any room with its tempered glass finish and modern LED display, which can be turned off while in use. It can be left freestanding by attaching the feet provided, or it can be easily fixed to the wall using the mounting parts included.
-
Page 3: Safety Instructions
Safety Instructions • Read the manual before you use the heater. Keep the manual and ensure it stays with the heater if you give it to a new owner. • Before use, check that the heater and all supplied accessories are complete and intact. -
Page 4: Installation Instructions
• To prevent a hazard, the manufacturer, a service representative, or someone else similarly qualified must replace the supply cord if it is damaged. • Avoid the use of an extension cord, as this may overheat and cause a fire risk. •... -
Page 5: Wall Mounted Installation
Wall Mounted Installation Please read and understand these wall mounting instructions before attempting any fitting of this product Take out the Hook Brackets (x4), wall plugs (x6) & screws (x6). 2. Select the unit position for wall mounting and mark the wall using the brackets as a guide, the measurements are shown below. - Page 6 4. To fix the the heater on to the wall, hold the sides of the product and position the holes A & B on the back of the product to line up with the bracket hooks on the wall. Then push the unit on to the bracket hooks and slide in the direction of the arrow (1) until the unit sits securely on the bracket hooks.
-
Page 7: Using The Heater
Using the Heater Display Screen WiFi Connection Up/Down Comfort Mode Power switch/WIFI setting Eco Mode Keyboard lock Anti-Frost Mode Working Status: If it is heating, the icon is displayed Setting Heater Control 1. The heater will beep as it powers on. The heater starts on standby mode, displaying WiFi icon and the current temperature of the room in 2. - Page 8 4. To adjust the set temperature of any of the modes, You can press the setting button, when the digital light flashes then use the UP and DOWN buttons to adjust the temperature. Temperature range is from 5°C to 50°C Please Note: The temperature cannot be adjusted in anti-frost mode! 5.
- Page 9 5. The app will then display its connecting screen. PLEASE NOTE: If the heater is failing to connect, press and hold the button for three more seconds. It will then switch to its secondary connection mode. The heater has two connection modes: one where the icon flashes slowly (once per second) and one where the icon flashes fast (three times per second).
- Page 10 Using the Smart Life App You can use the app to control multiple devices. The status of your devices is shown on the device list: • Offline (device is turned off at the wall or rocker switch) • Turned Off (the device is in standby mode). •...
- Page 11 Scheduling your Heating You can programme your heating by creating a schedule of “events”, where the heater switches on or off. These events can be temporary, like setting a timer, or they can be recurring, so the heater switches on at the same time every week. You can set an unlimited number of events, switching the heater on and off across the week.
-
Page 12: Smart Features
Smart Features The “Smart” section of the SmartLife app allows you to add functions that make your heating easier and more intuitive to control. The Smart section can be reached by pressing the Smart icon at the bottom of the app. •... - Page 13 • Automation Automation allows you to set up actions triggered by external events. Triggers include the weather, temperature, humidity, sunset, sunrise, and your location. You can add multiple actions and multiple triggers for each Automation event, so you could, for example, set all your heaters to come on at 21 °C if you arrive home when it’s snowing.
- Page 14 scenarios and devices but cannot add or remove them. • FAQs Find the answer to many troubleshooting problems in the app’s FAQ Press then FAQ & Feedback. Cleaning and Care Maintenance Always disconnect the appliance and let it completely cool before any maintenance. Use a vacuum cleaner to remove dust from grilles.
-
Page 15: Technical Support
Technical Specifications Product name Electric Glass Panel Heater with WiFi Control Supplier code DMDSH1 Voltage/Ampage Input: 230V AC~ 50/60Hz Power 2000W Size 78cm (W) x 22.5cm (D) x 51.5cm (H) -
Page 16: Declaration Of Conformity
Product: Electric Glass Panel Heater with WiFi Control Model No: DMDSH1 Manufacturer: The Ace Supply Company Ltd T/A Streetwize; Suite GA, Marsland House, Marsland Road, Sale M33 3AQ EU Authorized Representative : Ace Supply Co (Europe) Ltd; 25 Herbert Place, Dublin 2. DO2 AO98 Republic of Ireland.
Need help?
Do you have a question about the DMDSH1 and is the answer not in the manual?
Questions and answers