Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Robusta TRAPOFLEX S
- Page 1 TRAPOFLEX-WORKING PLATFORM “S“ Item No. 743016...
-
Page 2: General Safety Instructions
ROBUSTA-GAUKEL Company. ROBUSTA-GAUKEL is responsible for ensuring that a hard copy of this manual is available at the deployment site. The safety of the workforce in specific on-site situations is also the responsibility of ROBUSTA-GAUKEL. In addition to this manual, a general risk assessment has been conducted by ROBUSTA-GAUKEL;... - Page 3 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS 01.08.2022 Page 3 from 14 2. Intended use With the TrapoFlex-working platforms a safe stop surface with a surrounding side protection outside of the building can be mounted. So the material for casings and scaffolding as well as component parts for the inside construction can be placed without dangerous diagonal pull by crane.
- Page 4 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS Page 4 from 14 01.08.2021 3. Survey of single parts TrapoFlex Type S Representation: as-received as pre-installed asemblies Sizes, weights and suspension points positioner, 2 fixing possibilities for short and long props „links“...
- Page 5 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS 01.08.2022 Page 5 from 14 3. Survey of single parts TrapoFlex Type S Single props with 1 spindle Type Extension Length Weight Item No. length L [m] L 1 [m] [kg/unit] 3-AL 1.70 –...
- Page 6 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS page 6 from 14 01.08.2021 4. Stacked TrapoFlex-platform for storing and transportation Attention: when transporting with fork lift mind the position of the center of gravity! with stacking ring at the lower side of the traverse Stacking positioner metal sheet...
- Page 7 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS 01.08.2022 Page 7 from 14 5. Final mounting at the building 4 strand chain hanger 1. Insert side protection railings and secure each with 1 Linch pin 2. Bring in complete mounted platform with crane and place on top of the slab.
- Page 8 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS Page 8 from 14 01.08..2021 3 A: alternative fixing: Direct anchoring with tie bars and counter anchoring to the lower slab underneath, if necessary use additional girders for load distribution. 4 A: Remove platform from crane only after that! After that the platform is ready to use!
- Page 9 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS 01.08.2022 Page 9 from 14 6. Components TrapoFlex-working platform Type S Part Item No. Quantity cantilever girder leftside 743063 1 x L = 6,00 m cantilever girder rightside 743062 1 x L = 6,00 m swifeling plate and positioner included platform 3000 x 800 mm...
- Page 10 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS Page 10 from 14 01.08.2021 7. Assembling TrapoFlex-working platform Type S The TrapoFlex-working platform Type S is delivered already assembled. For easier mounting we recommend to use square timbers or girders as a helping construction. Also other supports are recommended such as steel girders or rectangular tubes.
- Page 11 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS 01.08.2022 Page 11 from 14 4. Placing of both cantilever girders “left-side” and “right-side”, borings must be in alignment 5. Screwing of the frames with the traverses and both of the steel beams 6.
- Page 12 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS Page 12 from 14 01.08.2022 8. Disposal In principle, material that is no longer usable or defective must be disposed properly and professionally in accordance with the applicable legal regulations. The components are made of galvanized or hot-dip galvanized steel.
- Page 13 TRAPOFLEX-WORKING PLATFORM “S“ – ITEM NO. 743016 ORIGINAL ASSEMBLY INSTRUCTIONS 01.08.2022 Page 13 from 14 Errors and changes of technical data excepted.
- Page 14 ROBUSTA-GAUKEL GMBH & CO. KG Niederlassung Berlin: Hauptsitz: Rohdestraße 19 Brunnenstraße 36 D-12099 Berlin (Tempelhof) D-71263 Weil der Stadt-Hausen Telefon +49 30 75 70 70 00 Telefon +49 70 33 5 37 10 Telefax +49 30 75 70 70 07 Telefax +49 70 33 53 71 31 Internet www.robusta-gaukel.com...
Need help?
Do you have a question about the TRAPOFLEX S and is the answer not in the manual?
Questions and answers