Do you have a question about the 800-190V70 and is the answer not in the manual?
Questions and answers
Roz cannon
April 16, 2025
Hi do still attach the 2 pipes. If your filling it manually I don't mean the pipe that flows water into sink
1 comments:
Mr. Anderson
May 9, 2025
No, the HOMCOM 800-190V70 does not require manual filling. It connects a water inlet pipe to a G3/4 water tap for automatic water filling and a drainage pipe for water discharge.
This answer is automatically generated
Lorna Wheat
April 5, 2025
E4 keeps comming on
1 comments:
Mr. Anderson
April 5, 2025
The E4 error code for the HOMCOM 800-190V70 indicates a heating alarm, meaning there is a problem with the heater or the temperature sensor.
This answer is automatically generated
Paul Collins
July 7, 2025
Does this dishwasher need salt and if so where does it go?
Elizabeth Mcintosh
June 18, 2025
The reason I bought this dishwasher was that it didn’t needed plumbed in, I fucked up the dishwasher with water manually switch the dishwasher on and water started to pour out the bottom of the dishwasher, I had the pipe connected but didn’t have the other part connected as I felt that manually could you please tell me what I have done wrong or is that part missing? If not it will be getting sent back thank you..
Elizabeth Mcintosh
June 18, 2025
Do you have to connect it to a tap if u are filling it manually
Michael Brackenbury
June 13, 2025
We have a HOMCOM 800-190V70 mini dishwasher. It is nine months since we purchased it online and it has worked perfectly until today. I can’t find any rating in amps for a replacement fuse to go into the housing in the supply plug. The machine made an odd noise, then the fuse blew, tripping the mains tripswitch. Can you help please?
Mrs sayer
February 7, 2025
Brand new used today and it’s leaking from bottom.
CONTENT Getting to know your dishwasher Inner structure and parts name-------------------------------------------------------------------------3 Control panel-----------------------------------------------------------------------------------------------3 Accessories list--------------------------------------------------------------------------------------------4 Products Features----------------------------------------------------------------------------------------4 Technical data---------------------------------------------------------------------------------------------4 Safety cautions--------------------------------------------------------------------------------------------4 Installation guide Unpacking---------------------------------------------------------------------------------------------------5 Positioning the appliance--------------------------------------------------------------------------------5 Electrical Connection-------------------------------------------------------------------------------------7 Adding water mode---------------------------------------------------------------------------------------7 User guide Program overview-----------------------------------------------------------------------------------------8 How to place tableware----------------------------------------------------------------------------------9 How to use the rack---------------------------------------------------------------------------------------9 Fill the detergent-----------------------------------------------------------------------------------------10 Not suitable for dishwasher----------------------------------------------------------------------------10...
Inner structure and parts name Parts Parts Water tank cover Handle Control panel Filter screen Spray arm Filter Inner glass door Top spray Dish rack Control panel...
Power on/off Keep Set appointed Choose Clean fruits Pause or tableware time to wash wash mode Start Accessories list Dish rack Drainage pipe Pipe clamp (for drainage pipe) Chopsticks box Water inlet pipe Measuring cup Fruit basket Suction pad Operating manual Products Features ●...
7. This appliance cannot be installed outdoor, not even if the area in which it is installed is covered by a roof; it is also very dangerous to leave it exposed to the rain and elements. 8. Do not place any heavy objects or water container, it will influence the dishwasher work or cause damage.
Page 6
2. Keep the appliance away from gas stove or other heat producers(over 300mm) 300mm 3. To easily inlet or drain, place this appliance on the cabinet or table. 4. Do not place this appliance in below place: - The place with direct sunlight - Frozen place - Uneven and unstable place 5.
6. Fix drainage pipe on the sink with suction pad 7. Connect the water inlet pipe - Connect the water inlet pipe to the threaded G3/4 water tap - Make sure it is fastened in place. - If the pipe is new or has not been used for a long time, run water to ensure that the water is clear and free of impurities.
(WARNING: The display will show “E1” error code if water tank isn’t fully filled up) ● Adding water automatically - Connect water pipe into dishwasher, it will add water automatically. - Make use the water pressure is between 0.03MPa and 1.0MPa, if over than 1.0MPa, will damage the appliance, if less than 0.03MPa, will influence appliance work.
Arranging crockery, glasses, etc. in the dishwasher Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washed.
How to fill the detergent Detergent specifically intended for use with dishwashers must be used. For the table dishwasher without dispenser, so the detergent fill into the dishwasher directly. And must be refilled before the start of each wash cycle. Not suitable for the dishwasher 1.
Program data The stated program data are based on standard operating conditions. The values can vary considerably according to different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage machine-related factors (e.g. temperature, water volume, ...) Switching the dishwasher ON Closed the door, then ●...
● No solvents or abrasive cleaning products To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little while vinegar, or cleaning product made specifically for dishwashers.
Spray arm Lime and remnants of food in the washing water can block the nozzles in the spray arms ● Inspect the nozzles in the for blocked holes due to remnants of food. ● If necessary, pull the lower arm upwards and lift it off. ●...
Page 14
The door is not closed, or the connecting cable is The door is open broken Water remains inside appliance after program has ended ● Blockage or kind in drainage hose. ● Pump is jammed. ● Filters are blocked. The program is still running. Wait for the program to end. During washing Unusual amount of foam is creased ●...
Page 15
Plastic items are discolored ● Not enough detergent was added to dishwasher. ● Detergent has insufficient bleaching properties. Use a detergent containing a chemical bleaching agent. White stains are left on crockery, glasses have a milky appearance ● Not enough detergent was added to dispenser compartment. ●...
Need help?
Do you have a question about the 800-190V70 and is the answer not in the manual?
Questions and answers
Hi do still attach the 2 pipes. If your filling it manually I don't mean the pipe that flows water into sink
No, the HOMCOM 800-190V70 does not require manual filling. It connects a water inlet pipe to a G3/4 water tap for automatic water filling and a drainage pipe for water discharge.
This answer is automatically generated
E4 keeps comming on
The E4 error code for the HOMCOM 800-190V70 indicates a heating alarm, meaning there is a problem with the heater or the temperature sensor.
This answer is automatically generated
Does this dishwasher need salt and if so where does it go?
The reason I bought this dishwasher was that it didn’t needed plumbed in, I fucked up the dishwasher with water manually switch the dishwasher on and water started to pour out the bottom of the dishwasher, I had the pipe connected but didn’t have the other part connected as I felt that manually could you please tell me what I have done wrong or is that part missing? If not it will be getting sent back thank you..
Do you have to connect it to a tap if u are filling it manually
We have a HOMCOM 800-190V70 mini dishwasher. It is nine months since we purchased it online and it has worked perfectly until today. I can’t find any rating in amps for a replacement fuse to go into the housing in the supply plug. The machine made an odd noise, then the fuse blew, tripping the mains tripswitch. Can you help please?
Brand new used today and it’s leaking from bottom.