Ecolink ClearSky CSB-HK02 Manual

CSB-HK02 Ecolink ClearSky Bridge
Specifications
Frequency: 345 MHz ClearSky
2.4 GHz Bluetooth
Power: 5VDC 1A
The ClearSky Bridge is a HomeKit-enabled accessory which enables the use of ClearSky sensors
endpoints such as the ClearSky Chime+Siren, ClearSky Motion Sensor, ClearSky Contact
Sensor, and ClearSky Key Fob with HomeKit technology.
Home Hub: Controlling this HomeKit-enabled accessory automatically and away from home
requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you
update to the latest software and operating system.
Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the HomeKit-
enabled ClearSky Bridge is secured by HomeKit technology.
https://www.apple.com/ios/home/
Legal Notice: Use of the Works with Apple badge means that an accessory has been designed to work
specifically with the technology identified in the badge and has been certified by the developer to meet
Apple® performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
Apple, Apple Watch, HomeKit, HomePod, iPad, iPad Air, and iPhone are trademarks of Apple Inc. registered in
the U.S. and other countries. tvOS is a trademark of Apple Inc.
FCC ID: XQC-CS902
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
IC: 9863B-CS902
Operating Temperature: 32°-120°F
Operating Humidity: 5-95% RH
Indoor Use Only
PN: CSB-HK02