Acer Aspire TC-1760-UA93 User Manual page 71

Performance
Mode - Standard
Picture
Over Drive
Color
F reeSync
Audio
V RB
Performance
Refresh Rate Num
OSD
System
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to control functions.
4. Over Drive: Select Off, Normal or Extreme.
5. FreeSync:To choose FreeSync on/off.
6. Refresh rate num: Display the panel's current refresh rate on the screen.
Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD.
VRB: When VRB is set to Normal or Extreme, the dynamic picture fine lines will
become more clearly, but the brightness will be reduced, and default will be "Off".
VRB Setting
VRB and FreeSync cannot be enabled at the same time. If FreeSync
turned on, then VRB will be "Off".
When VRB is "On", Brightness, Blue Light and ACM cannot be adjusted
unless it is "Off".
VRB is enabled when Input Timing = 75Hz. If Input Timing <75Hz, VRB
is grayed out and disabled.
OSD
Mode - Standard
Picture Language
Color OSD Timeout
Audio Transparency
Performance OSD Lock
OSD
System
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
Normal
Off
Off
Off
X
English
10
Off
Off
X