Table of Contents
Advertisement
II
,,9o
1
2
I _t'_F_
3
©
To household
AC outlet
AM loop antenna
• Plug the AC power cord into a household AC outlet only after all
other connections
have been made.
• To prepare the AM loop antenna wire and speaker cords, twist the
vinyl cover tip and pull off.
1
Connect
the FM indoor antenna.
Tape the antenna to a wall or column,
in a position where
radio
signals
are
received
with
the
least
amount
of
interference.
2
3
For the best reception :
An FM outdoor antenna is recommended (,.,_ page 7.)
Connect
the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Put the antenna where the reception is best
and interference is minimal.
Connect
the speaker
cables.
Connect each end of the speaker cables to the terminal lever
of the same color so (+) and (-) are correct.
Never allow the
exposed wires to contact each other when connected.
Incorrect connection
can damage the unit.
A
Use only the supplied speakers
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
Caution
• Use the
speakers
only
with
the
re-
commended
system.
Failure to do so may lead to damage to the
amplifier
and/or
the speakers,
and may
result in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
• Do not attach these speakers to walls or
ceilings.
4
Connect
the AC power cord
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment
Advertisement
Table of Contents
