Fluff In The Fabrics - AEG L8WBI864T3 User Manual

14.3 Timed Drying
1. Tap on the Time Dry button repeatedly to
set the desired time value (see the
"Timed drying" table in the "Programmes"
chapter). The drying level indicator
goes off and the indicator
Each time you tap on this button the time
value increases by 5 minutes. The display
shows the set new time value.
2. Touch the Start / Pause
programme.
In the display the door locked
comes on.
The display also shows the remaining
programme time.
14.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they are
active).
• In the display
• The indicator of the Start / Pause button
goes off. The door locked
off.

15. FLUFF IN THE FABRICS

During the washing and/or drying phase,
some types of fabric, (sponge, wool,
sweatshirt) could release fluff.
The released fluff could stick to the fabrics
during the next cycle.
This inconvenient increases with technical
fabrics.
To prevent the fluff in your laundry, we
recommend that you:
• To do not wash dark fabrics after you
washed and dried light coloured fabrics
(hand towel, wool, sweatshirt ) and the
contrary.
• To dry this type of fabrics at open air when
they are washed the first time.
• To clean the drain filter.
• After the drying phase, clean the empty
drum, the gasket and the door with a wet
cloth.
44 ENGLISH
comes on.
to start the
indicator
comes on.
goes
The appliance continues to operate with
the anti-crease phase for approximately
30 minutes or more if Anti-crease option
was set.
The anti-crease phase reduces creasing.
You can remove the laundry before the
anti-crease phase is completed. We
recommend, for better results, that you
remove the laundry when the phase is
almost completed or completed. The
indicator remains lit.
• Press the On/Off button for some seconds
to deactivate the appliance.
After some minutes from the end of
the programme, the energy saving
function deactivates the appliance
automatically.
1. Remove the laundry from the appliance.
2. Make sure that the drum is empty.
After drying phase, clean the drum, the
seal and the inside of the door with a wet
cloth.
To remove the fluff inside the drum, set a
special programme:
• Empty the drum.
• Clean the drum, the gasket and the door
with a wet cloth.
• Set the Machine Clean programme and
the Dry Mode together to activate the anti-
fluff action.
• Touch the Start / Pause
the programme.
If the appliance is frequently used, carry
out the cleaning programme regularly.
button to start