Thitronik NFC Modul Quick Start Manual

Advertisement

Technische Daten | Technical data | Caractéristiques techniques
Communication:
NFC – Near Field Communication | Mifare DESFire® EV2 | ISO14443- (13,56MHz)
Power supply:
Batteries: 3 × Alkaline (LR03) AAA | Voltage 3 × 1,5 V = 4,5 V
Battery life:
Up to 1 year
Radio range:
Communication with the control unit - up to 75 m
KeyCard range:
Up to 35 mm to the NFC module
Radio frequency:
868,35 MHz
Compatibility:
WiPro III | WiPro III safe.lock | WiPro easy | C.A.S. III
Operating temperature:
–10° C bis +70° C
Dimensions (Ø × D):
89 × 19,5 mm
Weight:
100 g
Scope of deliver:
NFC Modul | KeyCard | Adhesive pad | 3 × Alkaline (LR03) AAA Batteries
Thitronik GmbH hereby declares that this product complies with the requirements
and regulations of the directive 2014/53/EU. The full declaration of conformity is
available for download: https://www.thitronik.de/support
The NFC module may only be used for wireless control of the THITRONIK alarm system. Any other use,
in particular use for other technical applications, is prohibited and may result in damage to the product
and danger to persons and property. The manufacturer accepts no liability for damage caused by
improper use of the NFC module.
THITRONIK® NFC Modul
Kurzanleitung | Quick start Guide | Instructions brèves
Thitronik GmbH | Finkenweg 9 – 15 · 24340 Eckernförde
kontakt@thitronik.de | www.thitronik.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NFC Modul and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Thitronik NFC Modul

  • Page 1 2014/53/EU. The full declaration of conformity is available for download: https://www.thitronik.de/support The NFC module may only be used for wireless control of the THITRONIK alarm system. Any other use, in particular use for other technical applications, is prohibited and may result in damage to the product and danger to persons and property.
  • Page 2 Inbetriebnahme | Commissioning | Mise en service 1. Batteriesicherung entfernen 2. Anlernmodus der Alarmzentrale starten 3. NFC Modul mit beiliegender Karte auslösen 4. Anlernmodus der Alarmzentrale beenden (Siehe Anleitung aus Schritt 2.) EN: Remove battery strap EN: Start the teach mode FR : démarrer le...

This manual is also suitable for:

KeycardAdhesive pad

Table of Contents