Thunder Laser AURORA Series User Manual
  1. Manuals
  2. Brands
  3. Thunder Laser Manuals
  4. Laboratory Equipment
  5. AURORA Series
  6. User manual

Thunder Laser AURORA Series User Manual

Hide thumbs Also See for AURORA Series:
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S MANUAL
AURORA SERIES
AURORA Series
Unified User's Manual
For AURORA 8 & 8 PRO
Thunder Laser
www.thunderlaser.com
tech@thunderlaser.com
June 2023
DONGGUAN THUNDER LASER EQUIPMENT CO., LTD
Dongguan City, Guangdong Province, China
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
1
tech@thunderlaser.com
Room1101, Building 3, No.68, Xingzhou Road, Shatian
Tel:(86) 18103043363
Town, Dongguan City, Guangdong Province, China

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AURORA Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Thunder Laser AURORA Series

Summary of Contents for Thunder Laser AURORA Series

  • Page 1 Unified User’s Manual For AURORA 8 & 8 PRO Thunder Laser www.thunderlaser.com tech@thunderlaser.com June 2023 DONGGUAN THUNDER LASER EQUIPMENT CO., LTD Dongguan City, Guangdong Province, China www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 2 AURORA SERIES Introduction This manual has been designated as a user’s guide for thunder laser systems and fiber laser machine installation; The manual is divided into eight chapters, including General Information Instructions, Safety Instructions, Key Components of every Laser Systems and the Installation Steps, Operation Instructions and Maintenance Instructions from THUNDERLASER Company.

  • Page 3: Table Of Contents

    CHAPTER 8 MAINTENANCE ................................64 8.1 G ...................................... 64 ENERAL AINTENANCE 8.2 C ......64 LEAN THE IELD LENS www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 4: Chapter 1. General

    Fire Hazard: High potential for fire. NEVER LEAVE IT UNATTENDED WHEN RUNNING! Tips: Helpful notes or info can make it easier to use or understand. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 5: Designated

    USER’S MANUAL AURORA SERIES 1.2 Designated The THUNDER LASER AURORA SERIES is intended exclusively for laser marking through the supplied marking software. Materials such as metal, anodized aluminum, and several plastics can be processed by the laser. As part of the intended use, the following points should also be observed: 1.

  • Page 6: Technical Parameter/Device Specification

    50-100kHz 1-4000kHz Frequency Pulse width 2-500ns Q-pulse width 1-50μs Cooling Air cooled Red dot pointer Laser Power<1mW, 630-680nm www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 7 Ambient temperature Operating temperature 0℃-40℃ Humidity Maximum humidity 80% Laser Safety Laser class Class Ⅱ CE-Compliant approved by FDA www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 8: Rohs Certificate

    USER’S MANUAL AURORA SERIES 1.5 RoHS Certificate www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 9: Manufacturer S Label

    It is recommended to record all of the data for access anywhere anytime. You will need to supply your Serial Number to our Support Team on occasion. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...

  • Page 10: Chapter 2. Safety

    If the removal of safety components is required during repair and service, the replacement of the safety components must be performed immediately after repairing. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 11: Laser Safety Information

    1. According to the assessment of the potential danger of the laser systems, the machine is classified into SECURITY CLASS 2. Thunder Laser AURORA series is a device of SECURITY CLASS 2, which is guaranteed by the protective housing and the safety installations.

  • Page 12: Safety Precautions When Operating The Device

    AURORA SERIES 2.3 Safety Precautions when Operating the Device Your Thunder Laser AURORA SERIES has an integrated safety system which immediately stops running when the protection cover (Lid) is opened. Opening the cover during the operation will interrupt the engraving.

  • Page 13: Warning And Information Labels

    The warning and information labels in various locations of the machine should always be carefully read and understood. If labels are lost or damaged, they must be replaced immediately. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 14 USER’S MANUAL AURORA SERIES www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 15: Chapter 3. Process Of Installing

    Chapter 3. Process of Installing 3.1 Unpacking When you receive your THUNDER LASER AURORA SERIES, it’s packed in a wooden box which contains the laser machine and additional accessories. The steps for unpacking and assembling of the laser are as follows.
  • Page 16 (a level concrete floor) with the recommended maintenance method is critical to the ongoing performance of the machine. It is also a premise for warranty. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 17: Connections

    Under no circumstances should you switch on the device if the voltages do not correspond with each other. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 18: Connecting The Computer

    Please refer to the following pictures about how to install the exhaust pipe: www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 19 AURORA SERIES The input voltage must correspond to the required range (AC 110V~240V 50/60 Hz) – see information label beside the connection socket. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 20: Chapter 4. Operation

    You can replace the field lens by rotating it. 11. Galvanometer Composed of two parts: optical scanning device and servo control. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 21 The device information is listed, such as serial number, manufacturing date and etc. 20. Exhaust fan socket To connect the main power of exhaust fan. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 22: How To Use The Display

    For Aurora 8, this button is not working. Auto focus button: Press it, the galvo will adjust the focal length automatically. Start button: Press it to run the job. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 23: How To Use The Camera

    You can check the marking progress through the camera. Open the camera app of your computer, and use the rear camera. User can check the work table when marking, like below. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 24: Chapter 5. Brief Introduction To Softwares

    How to choose correct driver for fiber and uv laser.  Driver of fiber www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 25 CV4 folder you saved from the U-disk that came with the fiber laser>>Select the CV4 driver>>Next>>Install, then the driver is installed successfully. See pictures below. Pic1 Pic2 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 26 USER’S MANUAL AURORA SERIES Pic3 Pic4 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 27 USER’S MANUAL AURORA SERIES Pic5 Pic6 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 28 USER’S MANUAL AURORA SERIES Pic7 Pic8 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 29 USER’S MANUAL AURORA SERIES Pic9 Then, you can open the software now. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 30: Software Setting

    1-4000kHz And we set all setting above before leaving the factory, so just check if these are correct. If not, change them according. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 31 Open the software>>Press “F3” button>>Field>>find the calibration file (say the name is110×110.cor) in the USB disk that came with the machine. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 32: Ezcad3

    CD directly to the hard disk. Then double-click the EzCad3.exe running software in the EzCad3 directory that has been installed. The computer must be authorized before the software runs, otherwise the software will not run normally. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 33: Driver Installation

    DLC1000 folder you saved from the U-disk that came with the fiber laser>>Select the DLC1000 driver>>Next>>Install, then the driver is installed successfully. See below pictures. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 34 USER’S MANUAL AURORA SERIES Pic1 Pic2 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 35 USER’S MANUAL AURORA SERIES Pic3 Pic4 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 36 USER’S MANUAL AURORA SERIES Pic5 Pic6 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 37 USER’S MANUAL AURORA SERIES Pic7 Pic8 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 38: Activate The Software

    The dongle that came with the machine, with a string of activation codes on the back side. It’s already inserted into the machine, as shown below: www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 39 The activation code can only activate 5 computers!!! Find the activation code and copy it. Open the activated software LicenseManager X64 in fiber software folder. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...
  • Page 40 USER’S MANUAL AURORA SERIES Click License activation icon Click “online activation via the internet” and click “ok” www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 41 USER’S MANUAL AURORA SERIES Click “Get the activation request file” and enter the activation code that you record. Then click “OK”. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 42 USER’S MANUAL AURORA SERIES Then it will show “Activate SN successfully”. Now, the SN is activated successfully. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 43: Software Setting

    Open the software, then press “F3” and select items according to the picture below（take MOPA 20W as an example）. Laser type: FIBER Frequency(kHz): Min Value:1, Max Value:4000. FIBER: Type: IPG_YLPM(Type:D) www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 44 Open the software>>Press “F3” button>>Field>>find the calibration file (let’s say the name is 9×9.cor) in the USB disk that came with the machine. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 45: Chapter 6. How To Set & Adjust The Focus Length Of Auto-Focus

    Chapter 6. How to set & adjust the focus length of Auto-focus AURORA series marking machines can be equipped with 3 field lenses (F-160, F-220, F-290), UV laser is equipped with 2 field lenses (F-170, F-254). and the focal lengths of different field lenses are different. After changing the field lens, the user needs to adjust the focus of autofocus again.
  • Page 46 USER’S MANUAL AURORA SERIES Pic1 Pic2 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 47 2(divided into 9 gears, 1 fastest, 9 slowest, 1-9 speed decreasing), then click “Send”, the window of “successfully set” will be presented. And input the focal length according to the reference form. Focal Length for different lens (for reference only) www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...
  • Page 48 It is recommended to set the speed to 100mm/s and the power to 30%. Low-speed marking makes it easier to observe changes in focal length. Click on the red light, align the www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 49 DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...

  • Page 50: Chapter 7 The First Time To Run The Fiber Laser

    2. Turn on the key switch and emergency button. 3. Press”ON” button to initialize the machine. 3. Place the material on the working platform. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 51 Turn on the machine>> turn on the software, otherwise the software cannot connect with the machine. 5. Import your file to EzCad3 This software supports these file types. Vector Files www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 52 6. Press “Hatch”, choose Hatch1(or you can choose the others as you need), set the Line space as 0.05mm (we recommend the range of 0.01-0.1mm), then press “OK”. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 53 For different watts, the frequency range is different, please refer to the table below. UV laser Fiber laser MOPA laser Frequency 20-150kHz 20-60kHz 50-100kHz 1-4000kHz www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 54 “Auto focus” button. The galvanometer will adjust the focus distance automatically, which will last for 2-3 seconds. After hearing a beep (from the indicates light), the focus distance adjustment is complete. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...
  • Page 55 9. Press Key F1 or Red(F1) in software, then fiber will virtually mark out the size of your file. Adjust the position of your material according to the red area. See pictures below. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 56 “Start” button of the fiber machine. 2. You can start to mark with “Start” button also. 11. The fiber laser will mark your image. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...

  • Page 57: The First Time To Run Auv Laser

    Please must follow the steps to turn on the machine： Turn on the machine>> turn on the software, otherwise the software cannot connect with the machine. 5. Import your file to EzCad2 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...
  • Page 58 USER’S MANUAL AURORA SERIES This software supports these file types. Vector Files Image Files www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 59 6. Press “Hatch”, choose Hatch1(or you can choose the others as you need), set the Line space as 0.025mm (we recommend the range of 0.01-0.1mm), then press “OK”. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 60 F(kHz) PW(µs) <50 <33.33 <25 <20 <16.67 <14.29 <12.5 <11.11 <10 <9.09 <8.33 <7.69 <7.14 <6.67 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 61 “Auto focus” button. The galvanometer will adjust the focus distance automatically, which will last for 2-3 seconds. After hearing a beep (from the indicates light), the focus distance adjustment is complete. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363...
  • Page 62 USER’S MANUAL AURORA SERIES www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...
  • Page 63 “Start” button of the fiber machine. 2. You can start to mark with “Start” button also. 11. The laser will mark your image. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

  • Page 64: Chapter 8 Maintenance

    Do not use any tools or hard objects to clean the surfaces. Scratches cannot be repaired. Blow away large pieces of dirt by blowing up a balloon. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian...
  • Page 65 Do not exert any pressure on the lens. 10. Clean once half a year (depended on the usage). The End. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Tel:(86) 18103043363 Town, Dongguan City, Guangdong Province, China...

This manual is also suitable for:

Aurora 8Aurora 8 pro

Table of Contents