Traxon e:cue SYMPL serial Node Information For Use
  1. Manuals
  2. Brands
  3. Traxon Manuals
  4. Recording Equipment
  5. e:cue SYMPL serial Node
  6. Information for use

Traxon e:cue SYMPL serial Node Information For Use

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Read the Information for Use and the Safety Instructions
carefully. Subject to modification without prior notice.
Typographical and other errors do not justify any claim for
damages. Modification of the product is prohibited.
This manual is designed for electricians, system administrators,
and product users.
All product names and trademarks mentioned in this manual are
trademarks of their respective owners.
Except for internal use, relinquishment of the instructions to a
third party, duplication in any type or form - also extracts - as
well as exploitation and / or communication of the contents is not
permitted.
Downloads and more information at:
www.ecue.com
SYMPL serial Node
Information for Use
Edition:
18.07.23 [EN_SYMPL_serial_Node_Setup_v3p0]
Published by:
Traxon Technologies Europe GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2023 Traxon Technologies Europe GmbH
All rights reserved
Traxon Technologies Europe GmbH
Sales Operations
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com
AB444220035
e:cue

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the e:cue SYMPL serial Node and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Traxon e:cue SYMPL serial Node

  • Page 1 33100 Paderborn, Germany All product names and trademarks mentioned in this manual are trademarks of their respective owners. ©2023 Traxon Technologies Europe GmbH Except for internal use, relinquishment of the instructions to a All rights reserved third party, duplication in any type or form - also extracts - as well as exploitation and / or communication of the contents is not permitted.
  • Page 2 Ethernet connection Serial connection Power supply Network configuration Default network properties Network configuration with SYMPHOLIGHT Network configuration with the web interface Firmware Update Dismounting Certifications Dimensions WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 07/23 Sheet: 02 / 11...

  • Page 3: Safety Instructions

    SYMPHOLIGHT. It provides two independent serial interfaces, one RS-232 and one RS-485 channel. The e:cue SYMPL serial Node is powered by an external power supply or via Ethernet PoE. It is easily mounted on standard 35 mm DIN rails, or with a key hole in the housing base on walls or on any stable vertical surface.
  • Page 4 SYMPL serial Node — Information for Use | General device description Delivery content Delivery content for the e:cue SYMPL serial Node (AB444220035): e:cue SYMPL serial Node Safety instructions Welcome note Product specifications Dimensions (W x H x D) 53.5 x 90.5 x 62 mm/ 2.1 x 3.6 x 2.4 in (excl.
  • Page 5 (B) The Identify button can also be used to reset the device to factory state or to stay in bootloader mode. With a reset you restore the password and other properties by using the Identify button. Please note that WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 07/23...

  • Page 6: General Remarks

    Only transport the device in its original packaging. This protects the device from damage. Unpacking Only unpack the e:cue SYMPL serial Node at its installation location. To protect the device against condensation water, unpack it and wait until all moisture remaining in the device has evaporated.

  • Page 7: Installation

    Indoor Mounting process The e:cue SYMPL serial Node is designed to mount onto a 35 mm DIN rail (EN 60715) in a vertical position. Clip the device to the rail from top. Gentle pressure is then applied to the top front to snap it in place. The SYMPL serial Node has been mounted successfully.

  • Page 8: Network Configuration

    It is recommended to use twisted pair cabling  content Power supply The e:cue SYMPL serial Node can be powered via Power-over-Ethernet (PoE) or by an external power supply (PSU). PoE: Connect an Ethernet connection from a power sourcing device.
  • Page 9 Open a common web browser on a connected PC. Enter the SYMPL serial Node's IP address into the address bar: e.g. http://192.168.123.1 The web interface of the SYMPL serial Node is displayed: WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 07/23 Sheet: 09 / 11...

  • Page 10: Firmware Update

    (ESD protection). Disconnect all attached cables. Dismount the e:cue SYMPL serial Node from the rail by pulling the black DIN rail handle and unhitching the SYMPL serial Node. The dismounting is completed.
  • Page 11 Conforms to UL Std. 62368-1 4000805 Certified to CSA Std. C22.2 NO. 62368-1 Dimensions All dimensions in mm  content 53.5 90.5 Please check for the latest updates and changes on the Traxon website. © 2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED. www.traxon-ecue.com...

This manual is also suitable for:

Ab444220035

Table of Contents