Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Kiloview Manuals
  4. Video Card
  5. RN-40
  6. Quick start manual

Kiloview RN-40 Quick Start Manual

Video codec card, ndi high bandwidth, full functional codec card
Hide thumbs

Advertisement

Quick Links

Download this manual
RN-40 Video Codec Card
NDI High Bandwidth
Full Functional Codec Card
（2022-11 version）
Contents
◼
Packing List
◼
Device interfaces and functions
◼
Device connection, login and use guide
◼
Device upgrade and restore to factory settings
Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or
electrical damage to the device, please strictly follow the instructions of this guide to install and use it under the guidance of professionals.
Incorrect electrical connections or physical installation may cause permanent damage to the device and even threaten personal safety.
Leading solution provider of IP-based video transmission
Quick Start Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the RN-40 and is the answer not in the manual?

Questions and answers

Related Manuals for Kiloview RN-40

Summary of Contents for Kiloview RN-40

  • Page 1 Leading solution provider of IP-based video transmission Quick Start Guide RN-40 Video Codec Card NDI High Bandwidth Full Functional Codec Card （2022-11 version） Contents ◼ Packing List ◼ Device interfaces and functions ◼ Device connection, login and use guide ◼...

  • Page 2: Packing List

    1 Packing list (1) RN-40×1 (2) Warranty Card×1 (3) Quick Start Guide×1 2 Device interface Reset 3.5mm LINE IN/OUT 1000M port with PoE USB Expansion HDMI IN Tally HDMI OUT...
  • Page 3 1. Align the card slots on both sides and push the card board in parallel. After pushing in, tighten the thumbscrews on the left and right sides. RN-40 supports 1U and 3U rack-mount installation. For more questions, please visit Kiloview official website: https://www.kiloview.com/en/support/docs/rack-mount/3u-frame/...
  • Page 4 4 Applications Ethernet Port Camera Redundant Power Monitor Power Supply HDMI Input HDMI Output Note ⚫ Rack-mounted frame is equipped with dual power supplies, but normally operate only one power input device. When dual power supplies are connected, it will be used as a redundant power supply backup. ⚫...
  • Page 5 Download Kiloview Multiview for free Visit website https://www.kiloview.com/en/ndi/multiview Kiloview Multiview is a free software for NDI video discovery, management and multi-view, which is popular and highly praised all over the world. 1) Start the Kiloview Multiview, open the setting interface...
  • Page 6 NDI video. Right click on the Studio Monitor interface, find the name of RN-40 in the pop up menu, click it for playing NDI video. At the same time, a gear icon will appear in the lower right corner, click it and then a browser...
  • Page 7 5.3 Direct visit by default IP If the RN-40 device cannot be found in the network by the above two methods due to the network conditions, please kindly try to access the device by its default fixed IP address 192.168.1.168. That is to say, enter http://192.168.1.168/...
  • Page 8 RN-40 Web page. When the device works under other mode, click icon “encoder” to switch back to encoding mode. For more configurations for RN-40, please visit Kiloview official website: https://www.kiloview.com/en/support/docs/RN-40/ 7.2 Decoding mode There are icons for switching between encoding mode and decoding mode on the left of the RN-40 Web page.

  • Page 9: Firmware Upgrading

    8 Firmware upgrading 8.1 Download the upgrading firmware Kiloview will continue to provide the firmware of upgrading functions and fix bugs for RN-40. Kindly visit: https://www.kiloview.com/en/support/download/ Select “NDI” in the filter list > “RN-40”, find the latest firmware to download.

  • Page 10: Restore Factory Settings

    8.2 Upgrade device firmware Login to the Web page of RN-40, click "Settings">"Firmware Upgrade" to check if there is any latest firmware available to download. If yes, select the downloaded firmware and click “Firmware Upgrade”. After uploaded the firmware successfully, the system indicates rebooting the device, you can either click “ok” or wait for automatically rebooting, please be patient.
  • Page 11 ⚫ All encoding decoding parameters of video and audio will be restored to default value. 10 Note To prolong the device life, please unplug the power and keep it properly if you don’t use it for a long time.
  • Page 12 For more questions, please contact us via： https://www.kiloview.com/en/support KILOVIEW Electronics CO., LTD. Tel：86-18573192787 Email：support@kiloview.com Web：www.kiloview.com/en Address: B4-106/109, Jiahua Intelligence Valley Industrial Park, 877 Huijin Road, Yuhua District, Changsha City, Hunan Province, China.