Advertisement
Quick Links
Advertisement
Related Manuals for Xunison M50 Mesh Tower
Summary of Contents for Xunison M50 Mesh Tower
- Page 1 Hub M50 Mesh Tower...
-
Page 2: Product Introduction
Xunison Hub M50 Mesh Tower Xunison Hub M50 Mesh Tower 1. Product Introduction The Xunison Hub M50 Mesh Tower is a high-performance router equipped with powerful Wi-Fi 6 technology, o ering a dual-frequency wireless concurrency rate of up to 1800 Mbps. -
Page 3: Product Installation
Xunison Hub M50 Mesh Tower 2. Product Installation 2.1 Ensure the cables are connected. 1. Connect the power adapter to one end of the wall socket and the other end to the device. The red light will indicate the device is powered 2. - Page 4 Xunison Hub M50 Mesh Tower 2.2 Product Configuration 1. Once the router is set up, connect your PC/Laptop to the router's Wi-Fi network by entering the SSID printed on the label located on the bottom of the router. xu_wifi_xxxxx xu_wifi_xxxxx xu_wifi_xxxxx_5G...
- Page 5 Xunison Hub M50 Mesh Tower 2.2.1 PPPoE Select "Broadband Dial-up (PPPoE)", and enter the broadband account and broadband password provided by your network opera- tor. Click “Next step”. 2.2.2 Automatic Internet access(DHCP) Select "Automatic Internet Access(DHCP)" and just click "Next step".
- Page 6 Xunison Hub M50 Mesh Tower 2.2.3 Static IP Select "Manually surf the internet". Enter the IP address, default gate- way, and the DNS information provided by the operator. Note: You need to set the network parameters provided by the operator or...
- Page 7 Xunison Hub M50 Mesh Tower 3. Enter the Wi-Fi SSID(2.4G and 5G)and password. Click “Finish setting”. xu_wifi_xxxx xu_wifi_xxxx_5G Note: Select the checkbox to keep the administrator/management password the same as the Wi-Fi password. The dual-frequency unification function is enabled by default. You can turn o the dual-frequency unification function if you need to set two separate...
- Page 8 Xunison Hub M50 Mesh Tower 3. LED Indicators Mode Color Status Solid Blue Mesh network Ring connected/Regular indicator Gateway Blinking Blue Gateway pairing Solid Red No network connection Blinking blue Satellite pairing Satellite Solid Blue Satellite successfully paired Red blinking...
-
Page 9: Ports And Interfaces
Xunison Hub M50 Mesh Tower 4. Ports and Interfaces Networking/Mesh button: Press and hold the Mesh button for 2-8 seconds until the blue light starts blinking to enter into the pairing mode(used to extend routing). Cable Interface: Used connect operator's... -
Page 10: Safety Guidelines
Keep out of the reach of children. Tips Please check the cable connections once the device is installed. Place the Xunison Hub M50 Mesh Tower in an appropriate place for internet connectivity. Restart the device in case of any internet connectivity problems. - Page 11 Max 23 dBm 5150 ~ 5250 MHz For additional information Please visit xunison.com/support to find answers to your sup- port questions and access the latest downloads and product services. You can also submit a ticket for any issues you may...
- Page 12 Xunison Hub M50 Mesh Tower Disposal Note It is important to properly dispose of electronic waste to prevent harm to the environment and human health. This product should be taken to a designated collection point for recycling of waste electrical and elec- tronic equipment.
- Page 13 Xunison Hub M50 Mesh Tower Declaration of conformity Hereby, Xunison Ltd. declares that the radio equipment type M50 Mesh Tower is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: xunison.com/support...
- Page 14 Bracken Business Park, Bracken Rd, Sandyford Business Park, Sandyford, Dublin, Ireland www.xunison.com...