Microsoft® is a registered trademark; Windows®, Windows NT®, Windows XP®, Windows 7®, Windows 8®, Windows 10®
All other trademarks or intellectual property mentioned herein belongs to their respective owners.
Information furnished by DAQ SYSTEM is believed to be accurate and reliable, However, no responsibility is assumed by DAQ SYSTEM for its use, nor
for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under
any patent or copyrights of DAQ SYSTEM.
The information in this document is subject to change without notice and no part of this document may be copied or reproduced without the prior
Page 1
All other trademarks or intellectual property mentioned herein belongs to their respective owners. Information furnished by DAQ SYSTEM is believed to be accurate and reliable, However, no responsibility is assumed by DAQ SYSTEM for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or copyrights of DAQ SYSTEM.
Base Grabber SYSTEM Camera Link Repeater ADP-CLR02 www.daqsystem.com Base Base Configuration Configuration Camera Camera [Main Features of ADP-CLR02] Supports standard Camera Link specifications e (DIN Connector or DC-jack) Power input connector selectable ...
Page 4
ADP-CLR02 User’s Manual It is used by connecting between the frame grabber and the camera as shown in the following figure. Camera-Link Camera Frame Grabber ADP-CLR02 [Figure 1-1. ADP-CLR02 One Base Application] Frame Grabber Camera-Link Camera-Link Camera Camera Frame Grabber ADP-CLR02 [Figure 1-2.
ADP-CLR02 User’s Manual 2. ADP-CLR02 Connector Select and use one of the two power connectors below. Connector SN8-6P It is a DC Circular connector that provides 7 ~ 12V. Pin1 Pin2 +12V/DC Pin3 +12V/DC Pin4 Pin5 Pin6 Connector It is a DC DIN connector that provides 7 to 12V. (DC-005(2.0))
(3) All DAQ SYSTEM products have a one-year warranty. -. The warranty period is counted from the date the product is shipped from DAQ SYSTEM. -. Peripherals and third-party products not manufactured by DAQ SYSTEM are covered by the manufacturer's warranty.
Page 8
ADP-CLR02 User’s Manual MEMO Contact Point Web sit : https://www.daqsystem.com Email : postmaster@daqsystem.com...