Wiring Connections - Pyle PLDMR27NBK User Manual

INSTALLATION
Connect all wiring harness and slide the head unit into the mounting collar
until it clicks into place.

Wiring Connections

1. Speaker Connectors:
Violet: Right Rear (+)
Violet / Black:Right Rear (-)
Gray: Right Front (+)
Gray/Black: Right Front (-)
White: Left Front (+)
White/Black: Left Front (+)
Green:Left Rear (+)
Green/Black: Left Rear (-)
2. Power Connectors:
Blue: Antenna / Remote
Red: Ignition (+12V)
Yellow: Battery (+12V)
Black: Chassis Ground (-)
- +12V DC Negative Ground.
- Only use speakers with 4 ohms impedance.
- The maximum current of the Amp remote trigger is 200mA.
V-OUT1 V-OUT2
AUX-L
AUX-R
3. Fuse 10A
4. Audio / Video Inputs & Outputs
V-OUT1: Video Output 1 (Yellow)
AUX-L: Audio Input Left CH
AUX-R: Audio Input Right CH
V-OUT2: Video Output 1 (Yellow)
F-L: Front left PRE-AMP output (White)
F-R: Front right PRE-AMP output (Red)
SUB: Subwoofer Output (Green)
R-L: Rear left PRE-AMP output (White)
R-R; Rear right PRE-AMP output (Red)
5. Radio Antenna Socket
SUB
F-L R-L
ANT
F-R R-R
www.PyleUSA.com
3