General Operation - Pyle PLR2DN User Manual

GENERAL OPERATION

Turn Unit ON/OFF, Change the Source
•
Press any button to turn on the unit.
•
Press the power (
Adjust the volume (VOL)
Rotate the VOL knob on the front panel or press the VOL+
on the remote control to increase or decrease the volume level.
Adjust Menu Options (SEL)
•
Press the SEL button on the front panel or on the remote control repeatedly to
cycle through the following adjustable audio functions: BASS, TREBLE, BALANCE,
FADER, EQ OFF, CLASS/ROCK/POP/ FLAT, LOUD ON/OFF, DX/LOC, STEREO/MONO,
CLOCK 12/24, AREA US/EU, AUTO/BLUE/RED/CYAN/GREEN/PURPLE/YELLOW/WHITE.
•
Rotate the VOL knob on the front panel or press the VOL+
on the remote control to adjust the selected item.
•
BASS/TREBLE: -7, -6, ~, -1, 0, +1,~, +6,+7
•
BALANCE: L7, L6, ~, L1, 0, R1,~,R6, R7
•
FADER: R7, R6,~, R1, 0, F1,~,F6, F7
•
EQ (Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
•
Loudness: LOUD ON/OFF
•
DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
•
Stereo/Mono: Switches between MONO and STEREO reception mode for
radio frequencies.
•
CLOCK 12/24: Select between 12 hours and 24 hours display.
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
•
AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
•
7 color-changing illumination in buttons:
This car radio device is equipped 7 color-changing illumination in buttons.
The illumination color can be preset Auto (color automatically change one
by one), Blue, Red, Cyan, Green, Purple, Yellow, White.
) button to turn the unit o .
/VOL-
button
/VOL-
button
www.PyleUSA.com
5