YHT-500 Q For the video portion, you will need a television or monitor. Refer to the Yamaha HTR-5540 Ownerís Manual , as well as those that came with your other components, for comp- lete instructions and cautions. Be sure to turn off all power while making connections.
REAR : 8 MIN. /SPEAKER NOTE: For your convenience, the Yamaha HTR-5540 receiver is equipped with two switched AC outlets (1 00 W max.). If desired, use them to power on connected components (e.g.,CD player) each time the receiver is turned on. However, do not use them for components equipped with clocks (e.g.,VCR).
Page 4
YHT-500 S ONNECTING NS-A329 (Front Right Ch.) Stripe Wire DIGITAL INPUT COAXIAL Yamaha HTR-5540 A/V Receiver OPTICAL (Rear Panel) Stripe Wire INPUT2 NS-A329 (Surround Right) YHT-500 Q PEAKERS RED = positive (+) use clear wire BLK = negative (-) use clear with...
Page 5
: 6 MIN. /SPEAKER REAR : 8 MIN. /SPEAKER NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5540 receiver. AUDIO VIDEO VIDEO V-AUX...
Page 6
OPTICAL Optical Cable (Included) Yamaha DV-S5450 DVD Player (Rear Panel) NOTE: Use the optical connection to enjoy 5.1 - channel surround sound found on DVDs recorded in the Dolby Digital or DTS Digital Surround format. *Analog Audio Out connections are required for playback of CD-Rs and recording from DVD to VCR.
Page 7
: 6 MIN. /SPEAKER REAR : 8 MIN. /SPEAKER NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5540 receiver. AUDIO VIDEO VIDEO...
Page 8
VIDEO AUDIO OUTPUT NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5540 receiver. ANT In Basic Cable (From Wall Jack) Premium Cable...
HIGH CUT switch to LOW. 3. Press the YST-SW005 POWER button to ON and power on all other components. POWER YHT-500 Q YST-SW005 S UBWOOFER 4. Play an audio source and adjust the HTR-5540's VOLUME control to a desired listening level.
Page 10
EMOTE ONTROL The YHT-500 Home Theater package includes a remote control. It comes pre-programmed to control your HTR-5440 receiver. NSTALLING ATTERIES EMOTE Insert the batteries in the correct direction by aligning the + and - marks on the batteries with the polarity markings (+ and -) inside the battery compartment.