Tuner [P; Automatic Tuning; Manual Tuning - Yamaha GX-505RDS Owner's Manual

3–DISC CD CHANGER
1
STANDBY
STANDBY
/ON
TIMER
2
INPUT
BASS TREBLE
PHONES
POWER
1 2
1 2
4 5
4 5
7 8
7 8
0 TUNER
PRESET
TIME PROG
A B
EDIT DISC SKIP
D
CD
/
DIRECTION
TAPE
REC/ PAUSE
YMERSION
SLEEP
VOLUME
5, 3 3
1 2 3
DISC DISC DISC
PRESET/TUNING/BAND A/B/C/D/E
/
PTY SELECT
3
R . D . S
FREQ
PTY/
REC/ AUTO/
MODE DOLBY NR PAUSE MANUAL MEMORY RAN
TIMER TIME ADJ HO
2 2 , 4
1
3
3
6
6
9
2
+ I0
PRESET
R.TIME
C
MODE
E
MUSIC
INPUT
2

Automatic tuning

1
Turn on the power.
2
Press INPUT until "TUNER" (2, 8) appears on the
or
display, or simply press TUNER on the remote control.
3
Select the reception band (FM or AM) by pressing PRESET/
TUNING/BAND (or TUNER on the remote control), and
confirm it on the display (2).
* Do not select the preset tuning mode (in which "PRESET"
(1) lights up on the display).
4
Press AUTO/MANUAL so that "AUTO" (4) lights up on the
display.
5
Press to tune to a higher frequency, or press
lower frequency.
(When tuned in to a station, "TUNED" (5) will light up on the
display.)
6
If the station where tuning search stopped is not the desired one,
follow step 5 again.
* If the tuning search does not stop at the desired station, change
to the Manual tuning method as described below.
* "STEREO" (3) will light up when an FM stereo broadcast
with sufficient signal strength is received.
Direct operation
TUNER on the remote control will work if it is pressed when this
system is in the standby mode or another input source is selected.

Manual tuning

1 1
Follow steps 1–3 of the Automatic tuning method.
2 2
Press AUTO/MANUAL so that "AUTO" (4) disappears from
the display.
3 3
Press and hold to tune to a higher frequency, or press and
hold to tune to a lower frequency.
Release the button just before reaching the desired frequency,
and then press it repeatedly until the desired frequency appears.
(When tuned in to a station, "TUNED" (5) will light up on the
display.)
Note
If you tune in to an FM station manually, it is received in monaural to
increase the signal quality.
Tuning operation
to tune to a
-17
E