Technical manual SOLO/SOLO3000 v1.6 p.2/12 Contents Contents ......................... 2 Acknowledgement ......................3 Information and recommendations ................4 Technical characteristics ....................5 SOLOPLUS/SOLOPLUS3000/SOLOPLUS5000 ........... 5 Compatibility ......................5 Wiring diagram ....................... 6 Connecting reader on C1P2FX control unit ............6 Connecting reader on C4PLUSFX control unit ............7 Connecting reader on GENIUS control unit ............
Technical manual SOLOPLUS /SOLO3000 PLUS p.3/12 Acknowledgement Dear client, You have just purchased a “SOLOPLUS /SOLOPLUS3000 / SOLOPLUS5000” fingerprint identification reader built by the company EDEN INNOVATIONS. The entire EDEN INNOVATIONS team would like to thank you for your interest as well as your confidence in our security solution.
Technical manual SOLOPLUS 500/3000/5000 v1.7 p.4/12 Information and recommendations Pursuant to European directive UTE C00-200, incorporating directives 89/336 EEC and 92/31 EEC, SOLOPLUS/SOLOPLUS3000/SOLOPLUS5000 complies with the following standards: • NF EN 50081-1 governing electromagnetic radiation, and • NF EN 50082-1 governing electromagnetic susceptibility. ...
Technical manual SOLOPLUS 500/3000/5000 v1.7 p.5/12 Technical characteristics 1) SOLOPLUS/SOLOPLUS3000/SOLOPLUS5000 Maximum power consumption ..300mA @12V Power supply voltage ...... 9 – 14VDC Weight ..........195 g Housing dimensions ......121 x 78 x 39 mm Operating temperature ....- 20°C to + 50°C ............
Technical manual SOLOPLUS 500/3000/5000 v1.7 p.6/12 Wiring diagram 1) Connecting reader on C1P2FX control unit POWER SUPPLY 12Vcc RS485 Data sheet : SYT recommended 1200m (2730 ft) Max Ø 0.6 mm (1/30 in) 2 pairs recommended Be sure to use the same pair for A and B Be sure to separate the supply from the bus RS485 Characteristic: Sensitive connection...
Technical manual SOLOPLUS 500/3000/5000 v1.7 p.7/12 2) Connecting reader on C4PLUSFX control unit POWER SUPPLY 12Vcc RS485 (?) Data sheet : SYT recommended 1200m (2730 ft) Max Ø 0.6 mm (1/30 in) 2 pairs recommended Be sure to use the same pair for A and B Be sure to separate the supply from the bus RS485 Characteristic: Sensitive connection...
Technical manual SOLOPLUS 500/3000/5000 v1.7 p.8/12 3) Connecting reader on GENIUS control unit Power Supply +12Vcc RS485 (?) Data sheet: SYT recommended 1200m (2730 ft) Max Ø 0.6 mm (1/30 in) 2 pairs recommended Be sure to use the same pair for A and B Be sure to separate the supply from the bus RS485 Characteristic: Sensitive connection...
Technical manual SOLOPLUS 500/3000/5000 v1.7 p.10/12 Check list SOLO / SOLO 3000 Serial number ID number Gasket Torx bit Torx screw Bag Wall seal...
Need help?
Do you have a question about the SOLO PLUS and is the answer not in the manual?
Questions and answers