Panasonic RX-DS14 Operating Instructions Manual page 3

Precautions
Before using this unit please read these operating instruc-
tions carefully. Take special care to follow the warnings
indicated on the unit itself as well as ne safety suggestions
listed below.
Afterwards keep them handy for future reference.
Safety
. Power Source—The unit should be connected to power
supply only of the type described in the operating instruc-
tions or as marked on the unit.
. Polarization—if the unit is equipped with a polarized AC
power plug (a plug having one blade wider than the
other), that plug will fit into the AC outlet only one way.
This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
—h
ÑN
w
should be routed so that they are not likely, to be walked
on or pinched by items placed upon or against them.
Never take hold of the plug or cord if your hand is wet,
and always grasp the plug body when eee or
disconnecting it.
. Nonuse Periods—When the unit is not used, turn the
power off. When left unused for a long period of time, the
unit should be unplugged from the household AC outlet.
fa
Installation
Environment
1. Water and Moisture—Do not use this unit near water—
for example, near a bathtub, washbowl, swimming pool,
or the like. Damp basements should also be avoided.
2. Condensation—Moisture may form on the lens in the
following conditions..
*immediately after a heater has been turned on.
ein a steamy or very humid room.
ewhen the unit is suddenly moved from a cold environ-
ment to a warm one.
if moisture forms inside this unit, it may not operate
properly. To correct this problem, turn on the power and
wait about one hour for the moisture to evaporate.
3. Heat—The unit should be situated away from heat
sources such as radiators and the like. It also should not
be placed in temperatures less than 5°C (41°F) or greater
than 35°C (95°F).
Oo wm
. Power Cord Protection—AC power supply cords
Placement
h
. Ventilation—The unit should be situated so that its loca-
tion or position does not interfere with its proper ventila-
tion. Allow 10 cm (4") clearance from the rear of the unit.
. Foreign Material—Care should be taken so that objects
do not fall into and liquids are not spilied into the unit. Do
not subject this unit to excessive smoke, dust, mechani-
cal vibration, or shock.
. Magnetism—The unit should be situated away from
equipment: or devices that generate strong magnetic
fields.
. Stacking—Do not place heavy objects, other than sys-
tem components, on top of the unit.
. Surface—Place the unit on a flat, level surface.
. Carts and Stands—The unit should be used only with a
cart or stand that is recommended by the
manufacturer. The unit and cart combina-
tion should be moved with care. Quick.
stops, excessive force, and uneven sur-
faces may cause the unit and can combi-
nation to overturn. - es
nN
w
pan
7. Wall or Ceiling Mounting—The unit should not be
mounted to. a wall or ceiling, unless specified in this
operating instructions.
Maintenance.
- Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
Service
1. Damage Requiring Service—The unit should be ser-
viced by qualified service personne! when:
(a) The AC power supply cord or the plug has been
damaged; or 1>
(b) Objects have fallen or liquid has een spilled into the
unit; or
(c) The unit has been exposed to rain; or
- (d) The unit does: not appear to operate normally or
exhibits a marked change in performance; or
(e) The unit has been dropped, or the enclosure dam-
_ aged.
. Servicing—The user should not attempt to service the
unit beyond that described in the operating instructions.
All other servicing should be referred to an authorized
service personnel.
(Only for U.S.A.)
Cali 1-800-545-2672 for the address of an authorized
factory servicenter,
i
N